MikroTik - RBSXTR&R11E-LTE-US - MikroTik SXT LTE kit with enclosure

MikroTik RouterBOARD RBSXTR&R11e-LTE-US (US Version) MikroTik SXT LTE kit with enclosure RouterOS L3 These products will not work on Verizon’s US network outside large metro areas because they do not run Band 13. They are also not certified on Verizon so use them at your own risk. Check with your cellular provider before using on that carrier’s network. The SXT LTE kit (product code RBSXTR&R11e-LTE-US) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t. The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant The device has a built in high quality 3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link. Specifications RBSXTR&R11e-LTE-US Product code RBSXTR&R11e-LTE-US CPU QCA9531 650 MHz Size of RAM 64 MB Storage 16 MB Flash 10/100 Ethernet ports 2 LTE antenna gain 9 dBi Antenna beam width 60° LTE category 4 (150Mbps Downlink, 50Mbps Uplink) 3G category R8 (Cat24 - 42.2Mbps Downlink) R7 (Cat14 - 21.1Mbps Downlink) 2G category Class12 - SIM slot 2 (Micro SIM) PoE in Yes, on Ether1 PoE out Yes, on Ether2, max out per port output (input 30 V): 400 mA max total out (A): 600 mA Supported input voltage 18 - 57 V (Passive PoE, 802.3af/at on Ether2) Dimensions 140 x 140 x 103 mm Operating temperature -40°C .. +60°C tested License level 3 Operating System RouterOS Max Power consumption 6 W Supported Bands RBSXTR&R11e-LTE-US LTE (FDD) bands 2(1900)/4(1700)/5(850)/12(700) 3G bands 2(1900)/5(850)