- Free 30-day Returns
Meet Your Seller
32GB DDR5 4800MHz PC5-38400 1Rx4 1.1V CL40 288-PIN ECC Registered RDIMM NEMIX RAM Server Memory Compatible with ASRock Rack SIENAD10HM3 Motherboard - DDR5 4800MHz PC5-38400
- EXACT-MATCH UPGRADE 32GB DDR5-4800 (PC5-38400), 1Rx4 Registered ECC, 1.1V, CL40, 288-pin. The precise rank, voltage, and timing your server's memory controller expects, so it's recognized at full capacity and runs at its rated speed.
- VERIFIED FITMENT Compatible with the ASRock Rack SIENAD10HM3 Motherboard - DDR5 4800MHz PC5-38400. The 288-pin Registered (RDIMM) form factor this board requires not a UDIMM or SODIMM. Spec-matched to your board's memory-population rules.
- ENTERPRISE STABILITY Registered (buffered) architecture offloads the memory controller so every slot runs fully populated at full capacity, while ECC catches and corrects single-bit errors on the fly stopping silent data corruption and unplanned reboots before they reach production.
- CHECK YOUR CONFIG Server and motherboard memory support varies by model. Consult your system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before purchase.
- LIFETIME SUPPORT Backed by a lifetime replacement warranty and free US-based technical support.
Any questions? Ask CelesteSM will help you find out quickly.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NEMIX RAM Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The NEMIX RAM 32GB DDR5-4800 ECC Registered RDIMM is a server memory module listed as compatible with the ASRock Rack SIENAD10HM3 motherboard, for users upgrading a system that supports 288-pin DDR5 RDIMMs.
Recommended For
- Server administrators replacing or adding a 32GB module in an ASRock Rack SIENAD10HM3 system that supports DDR5 ECC RDIMMs and has been checked for the required DIMM type and population order.
- Operators maintaining always-on server workloads—such as virtualization, shared storage, or business services—who need ECC registered memory and are matching the module to their system’s existing configuration.
- Small-business and edge-server builders using an AMD EPYC 8004 system who want a DDR5 RDIMM for a supported capacity upgrade, while following the board and processor’s DIMM population guidance.
- System builders prioritizing a compatible registered-ECC memory type over consumer-desktop memory features such as a low-profile module, RGB lighting, or overclocking-oriented positioning.
Real-World Use Scenarios
- When a compatible server is running out of memory for virtual machines or containers, adding this module can provide more headroom for guest workloads; the practical gain depends on the system’s CPU, storage, and supported DIMM configuration.
- For a database or analytics server whose working set is growing, adding memory can give more data and application processes room in RAM, though it does not guarantee faster queries if storage or CPU is the bottleneck.
- When a web or application server needs to handle more active requests or service processes, extra memory can reduce pressure on available RAM; the resulting capacity for concurrent work depends on the application and the rest of the server.
- For a long-running server handling business data or shared services, ECC memory can help detect and correct certain memory errors, supporting data integrity without eliminating every possible cause of downtime or corruption.
- When building a compact, memory-intensive server, this module can contribute to the system’s total RAM capacity; check the motherboard’s DIMM population rules before installation, since a single module may not provide the intended memory-channel configuration.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | A 32GB ECC registered memory upgrade for the ASRock Rack SIENAD10HM3 server motherboard |
| Capacity And Configuration | 32GB in a single 32GB module, with a 1Rx4 rank configuration |
| Memory Technology And Performance | DDR5-4800 (PC5-38400) with CL40 latency at 1.10V |
| Error Correction And Registration | ECC, registered (buffered) RDIMM memory |
| Physical Design | 288-pin module with no heat spreader; listed color is black |
| Memory Chip Suppliers | Major OEM chips from Samsung, Micron, or Hynix |
| Model Identifiers | NEMIX RAM Original Series Server Memory; model DDR5 ECC RDIMM Registered Server Memory; part number MR38400-314K1 |
Reference Q&A
Q: Should I choose this 32GB NEMIX RDIMM or a 64GB NEMIX RDIMM?
A: Choose the 64GB module when you want more memory capacity from each DIMM. Choose this 32GB module when 32GB per DIMM fits your capacity plan. Both are DDR5-4800 RDIMMs; check the motherboard and processor’s memory-population rules for the planned configuration.
Q: Is this 32GB single DIMM or a 64GB NEMIX kit better for a 64GB memory target?
A: A 64GB kit made from two 32GB DIMMs provides 64GB total in two modules. This product is one 32GB DIMM, suited to a 32GB addition or a build planned around individual 32GB modules. Confirm the required DIMM population order for the system before choosing a kit or module.
Q: Should I use this 32GB DIMM or a NEMIX 128GB kit for a larger memory build?
A: Choose the 128GB kit when your target is 128GB total using four 32GB DIMMs. Choose this single DIMM when you need 32GB or are building capacity in stages. For the SIENAD10HM3, confirm the DIMM population plan for the processor and board before installation.
Q: Will this memory work in a regular desktop PC?
A: It is registered ECC DDR5 RDIMM server memory, not standard unbuffered UDIMM memory. Use it only in a system that supports DDR5 ECC RDIMMs; the product listing specifically identifies it for the ASRock Rack SIENAD10HM3 motherboard.
Q: How can I check whether this RAM is compatible with my server?
A: Confirm that the motherboard and processor support DDR5 ECC registered RDIMMs, and check the system manual for support for a 32GB 1Rx4 module, memory speed, and DIMM-population order. The listed compatible motherboard is the ASRock Rack SIENAD10HM3.
Q: Will it run at 4800 MT/s in my server?
A: The module is rated DDR5-4800 (PC5-38400), but its operating speed depends on the processor, motherboard, and installed memory configuration. Check the system manual to confirm the supported speed for your setup.
Q: Who is this memory suitable for?
A: It is suitable for a server or workstation that requires a 32GB DDR5-4800 ECC registered RDIMM and supports the module’s 1Rx4 rank configuration. It is not intended for systems that require UDIMMs or SODIMMs.













