Question 1

What is the PoE power output?

Accepted Answer

Total power budget of 192 Watts, customers can choose to plug in up to 24 Ethernet 
or Fast Ethernet devices and mix in up to 24 802.3af IP-based devices.

The original IEEE 802.3af-2003 PoE standard provides up to 15.4 W of DC power (minimum 44 V DC and 350 mA) to each device.Only 12.95 W is assured to be available at the powered device as some power is dissipated in the cable.

Question 2

how many of these ports are PoE?

Accepted Answer

All 24 10/100 ports are PoE.  Not sure about the GigE ports.

We bought this specifically to use for a PoE VOIP phone system... it works great.

Question 3

Is Netgear FS728TP compatible with Logitech Alert system cameras?

Accepted Answer

I'm afraid I cannot answer your question without the specific model number of the Logitech camera being installed.

You would only want to consider the Netgear FS728TP if you were installing 16 or more IP cameras requiring POE (power over ethernet).

Much of the Logitech Alert line is dc powered and or wireless transmission that still requires a dc power source.

Wish I could be of more help.

Question 4

I want to use this switch for cameras (on 192.168.1.xxx) and for WiFi APs (on 192.168.0.xxx).  Is there a way to segment into 2 switches so that devices attached to the APs can not access the cameras and vise versa?  Normally I use a separate switch for each but this is a small residential system and it is cost conscious.

Accepted Answer

A switch by default will keep the two networks separate. It only passes packets to specific IP's. Only broadcasts will go to all ports. Define your switch's IP based on your primary network (the AP's). The IP's that you assign can be further restricted by the subnet mask on each range if you wish. Also, I would recommend static IP's on the cameras presuming that the camera server will also be connected to the switch. Hope that this helps!

Question 5

is there a poe wattage per channel budget on this?

Accepted Answer

The total PoE budget is 192 watts, so that would be a max of 8 watts per port.

Brand	NETGEAR
Series	ProSafe
Model	FS728TP-100NAS

Format	Rackmount
Standards	IEEE 802.3 Ethernet IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.1Q VLAN Tagging IEEE 802.3x full-duplex flow control IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX IEEE 802.3ad Trunking (LACP) IEEE 802.1AB LLDP with ANSI / TIA-1057 (LLDP-MED) IEEE 802.1p Class of Service IEEE 802.3 af (PoE) IEEE 802.1D Spanning Tree (STP) IEEE 802.1s Multiple Spanning Tree (MSTP) (FS728TP Only) IEEE 802.1w Rapid Spanning Tree (RSTP) IEEE 802.1x (MD5) Radius network access control (except FS750T2)
Network Management Type	Smart

Primary Ports	24 x RJ45 + 4 x SFP
Primary Port Speed	10/100Mbps
Primary Port Type	24 x 10/100 Base-T RJ45 Ports 2 Copper and 2 combo copper / SFP

MAC Address Table	4K
VLAN Support	Yes

Buffer Memory	1MB
PoE	Yes
SNMP	Yes
QoS	Yes
LACP	Yes
Port Mirroring	Yes
Module Support	Yes
LEDs	Per port: Speed, Link, Activity Per device: Power, Fan and PoE Power Status (PoE model only)
Power	Total PoE Power budget (Watts): 192 Power Consumption: 256W

NETGEAR 28-Port PoE Fast Ethernet 10/100 Smart Switch with PoE (192W) (FS728TP)

Learn more about the Netgear Inc. FS728TP-100NAS

Customer Reviews of the Netgear Inc. FS728TP-100NAS

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Temperature	Operating Temperature: 0 ~ 50 °C (32 ~ 104 °F) Storage Temperature: -20 ~ 70 °C (-4 ~ 158 °F)
Humidity	Operating humidity: 90% maximum relative humidity, non-condensing Storage humidity: 95% maximum relative humidity, non-condensing

Dimensions & Weight
Dimensions	1.69" x 17.32" x 10.12"
Weight	7.87 lbs.

Item#: N82E16833122177