Question 1

On the specifications page it says it doesnt have the side window panel. however, the picture says other wise.

so does this have the window or not?

Accepted Answer

This case does have a very nice clear side panel.  This case was also very easy to work with when installing all of my components in it  I would absolutely recommend this case to a friend if they were looking into a case.

Question 2

Is it possible to turn the HDD cage?

Accepted Answer

I don't have it in front of me but if I remember correctly, the hard drive bay is not moveable. It's either welded or riveted in place.

It is pretty skeletal so you may be able to turn a HDD or SSD sideways. You just gotta figure out a way to attach it sideways. If its an SSD you can prolly just velcro it. If it's a regular HDD it could get a bit tricky.

Question 3

Does the case come with the motherboard standoffs and screws? Or is the motherboard we bought suppose to come with it?

Accepted Answer

Yes. Every case iv ever bought has come w everything u need (standoffs & screws). I've probably bought 20 or so motherboards n my life and in my experience, the standoffs never come with the motherboards...

Question 4

Will this case support a sapphire 270x toxic edition GPU? it measues 12.1 inches in length.

Accepted Answer

I don't have a card installed on my mobo that is this long, but is does look like it could accommodate a card of this length, but you would probably not be able to use one or two of the hard drive bays.   There is a metal case for the hard drives about 12.5"from the back case and 3.5"drives do extend back past this metal drive cage -- meaning you couldn't use one or two drives in this slots.

Question 5

are drive bays removable?

Accepted Answer

For mine, there were no drive bays caddys that came with the case.

The rack that holds drive caddys is melded to the case and not removable.

Question 6

I was wondering if this case came with Motherboard standoffs? Will I have to buy those separately?

Accepted Answer

It's been a while since i built this, but I do believe that it came with enough items to mount the motherboard.  I don't recall having to buy anything to install the relocated MB that I used.

Question 7

Will my gigabyte radeon r9 270x fit in this case?

Accepted Answer

@ itsalright... your card is 292 mm 11.5 inches. I had this case which had great cable management and had a fair amount of room for componants. I did some research and one of the comments on a different site mentioned graphics cards bigger than 10.9 inches you'll be fighting for hard drive space. I personally think the graphics card will work in the case, but you'll have to install you're hard drive in a different place. Cheers!

Question 8

can i put a h80i on this?

Accepted Answer

Absolutely. Though for the money I would just get a glacier 240L as it's made by swiftech and cooler master basically a relabeled h220 for 130$

While I haven't actually used the H80i in this case I've built two rigs on them and will be moving my 8320 rig into one because I can put my glacer 240L in and have a more compact rig. It has enough space thought as there are tons of fan slots. Two 120mm in the front, on top, and a single in the back.

Question 9

Is there any way to purchase just the side panel with the window?  I already have this case with out a windowed side panel.

Accepted Answer

Get in touch with NZXT directly, if they don't have one for purchase straight from their website, I'm pretty sure you can get one with an email or a phonecall.

Question 10

Would this case fit a SAPPHIRE VAPOR-X R9 270X 2GB GDDR5 OC WITH BOOST?

Accepted Answer

Yes. The card is similar to the 7870 and that card fits fine in the case. This case has good amount of extra room.

Brand	NZXT
Series	Source 210
Model	S210-001

Type	ATX Mid Tower
Color	Black
Case Material	SECC Steel, ABS Plastic
With Power Supply	No
PSU Mounte	Bottom
Motherboard Compatibility	Micro ATX / ATX
Side Panel	with Side Window

External 5.25" Drive Bays	3
External 3.5" Drive Bays	No
Internal 3.5" Drive Bays	8
Expansion Slots	7

Dimensions	19.51" x 7.68" x 17.32"
Weight	14.33 lbs.

NZXT Source 210 S210-001 Black SECC Steel, ABS Plastic ATX Mid Tower Computer Case

Learn more about the NZXT S210-001

Customer Reviews of the NZXT S210-001

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811146102