ORICO TECHNOLOGIES CO.,LTD
COMPATIBILITY: ORICO Nvme SSD enclosure supports PCI-E based M key & (M+B) key M.2 NVME SSD, up to 2TB; SATA-based B Key & (B+M) Key M.2 SSD or PCIe AHCI SSD are not supported.
SLEEP MODE: It will automatically enter into sleep mode when there is no operation within 10 minutes. This helps to prolong the service life of your hard drive.
EASY TO USE: Hot-swappable, Plug & Play, No Driver required. And you can use it widely on computers and Android phones(Android device should have USB-C port and supports OTG)
NOTE:
1. Only for NVMe M-Key M.2 SSD (PCIE-based). DOES NOT support M.2 SATA based SSD (NGFF).
2. To get 10Gbps data transmission rate, the USB 3.1 interface on your PC should be USB 3.1 Gen 2. Some PCs only comes with USB 3.1 Gen1 whose max speed is 5Gbps.
3. It is normal that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working.
4.For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
Enter sleep mode automatically after left unused for 10 minutes, it can prolong the service life of SSD.
Slim and pocketable size ( 106.5*29*11.5mm) makes it easy to take around. You can put it into a handbag / backpack / laptop bag, even a pocket.
The master controller support UASP protocol, transmission speed is faster and more stable. and just plug and play with no driver needed, very easy to Use.
Pros: Seems to work well, but I've only had an Intel 660p SSD (1TB) installed for a few days. Have not measured performance. Active but Idle, it wasn't too warm. I'll touch it under load sometime. I liked the auto power down feature as I'm using this in an always-on but power-sensitive application. Assembly (except thermal pad) was described OK and it went together smoothly. I didn't lose the hardware but could see that it's easy to do (tiny). Including the Torx tool was a real plus. I had to use a nut driver on the tool to get enough torque to removed the case screw - scary.
Cons: The included thermal pad didn't adhere well. There were no instructions regarding it. One picture I found on the vendor's site showed it on the removable plate. So I put it there but was not convinced it had contact with the PCB. As others have said, the parts are small.
Overall Review: Recommend for people comfortable with tiny hardware.