The OWC 1S6D31R802GB is a single 2GB DDR3-1600, 204-pin unbuffered SODIMM for compatible HP 450 and HP 1155 systems, suited to users seeking a system-specific memory upgrade.
Recommended For
- HP 1155 All-in-One owners replacing a failed or missing module, or adding 2GB to a configuration that supports this 204-pin, 1.5V DDR3 SODIMM. Check the installed memory and system configuration before ordering.
- Owners of older laptops or all-in-ones whose documentation confirms support for 2GB, 204-pin DDR3-1600, 1.5V SODIMMs can use this as a like-for-like replacement or a small capacity increase.
- DIY refurbishers maintaining a confirmed-compatible legacy PC who need one standard, non-ECC memory module rather than a larger multi-module upgrade.
Real-World Use Scenarios
- On a compatible older HP with little memory installed, adding this module can give basic web browsing, email, and document editing more room to run—especially when low memory is causing slowdowns. The improvement depends on the computer’s total memory and the apps in use.
- When a compatible HP is used for light office work, such as editing a document while keeping email open, a 2GB memory addition can reduce memory pressure if the system is running short. It is a modest upgrade, not a fix for slowdowns caused by the processor or storage drive.
- For a compatible HP kept as a spare or secondary computer, this module can be used to expand or replace memory during maintenance. Check the exact model’s supported memory configuration before installation; the module alone does not ensure that the computer will run modern software smoothly.
- If a compatible HP has a faulty or missing memory module, this can serve as a replacement part. If the fault is elsewhere, installing RAM will not resolve the underlying problem.
Spec Summary
| Attribute | Value |
|---|
| Best For | Laptop memory upgrades for HP 450 and HP 1155 systems |
|---|
| Capacity And Form Factor | 2GB DDR3 laptop memory module in a 204-pin SODIMM form factor; quantity: 1 |
|---|
| Speed, Timing And Configuration | DDR3-1600 (PC3-12800) with CL11 latency, 1.5V voltage, 1Rx8 rank, non-ECC and unbuffered operation; no heat spreader |
|---|
| Model Identifiers | OWC; part number 1S6D31R802GB; model OWC1S6D31R802GB-B403-SF |
|---|
Reference Q&A
Q: OWC 2GB vs. OWC 4GB DDR3-1600: which module should I choose?
A: Choose this OWC 2GB module for a 2GB upgrade step or to replace a 2GB module. Choose OWC’s 4GB DDR3-1600 module when you want twice the capacity from one module; both are 204-pin, 1.5V DDR3-1600 SO-DIMMs.
Q: OWC 2GB single module vs. OWC 8GB (2 × 4GB) kit: which is right for an HP 1155 or HP 450?
A: Choose this 2GB module for a smaller, single-module upgrade. Choose OWC’s 8GB kit when you want 8GB total across two 4GB modules; HP specifies an 8GB maximum for the 1155 and supports up to 16GB in the cited HP 450 service manual.
Q: OWC 2GB DDR3-1600 vs. OWC 2GB DDR3-1333: which should I pick for the listed HP systems?
A: Choose this DDR3-1600 module for the listed HP 450 and 1155 systems when matching the product’s DDR3-1600 specification. OWC’s 2GB DDR3-1333 module is the corresponding option for systems specified for DDR3-1333.
Q: Will this RAM work in my HP 450 or HP 1155?
A: The product is listed as compatible with HP 450 and HP 1155 systems. Before buying, confirm your exact model supports 204-pin DDR3-1600 SODIMM memory and has an available slot; compatibility questions are common because RAM requirements vary by computer model.
Q: Is this laptop RAM, or can I use it in a desktop?
A: It is laptop memory: a 204-pin SODIMM module. It is not the standard desktop DIMM form factor, so it is suitable only for a computer that supports this type of SODIMM.
Q: Does this package contain one 2GB stick, and is 2GB enough?
A: It contains one 2GB memory module. Whether that is enough depends on the computer’s existing memory and intended tasks; treat it as a small upgrade or replacement for a supported older system, and check the system’s maximum memory before purchasing.