The OWC 2GB DDR3-1600 SODIMM is a single-module memory upgrade for the HP Elite 8300 Ultra-Slim, suited to users seeking a system-specific 204-pin, 1.5V, non-ECC memory module.
Recommended For
- HP Elite 8300 Ultra-Slim owners replacing a failed 2GB SODIMM who want a module matching the system’s specified 204-pin, DDR3-1600, 1.5V, non-ECC memory type.
- Owners restoring a minimally configured or legacy-use Elite 8300 Ultra-Slim who need a small-capacity replacement rather than a substantial memory expansion.
- Repair technicians or refurbishers servicing an Elite 8300 Ultra-Slim who need a single 2GB module in the model’s supported SODIMM format.
Real-World Use Scenarios
- When an Elite 8300 Ultra-slim with 2GB of memory slows down during basic work, adding this module in an available compatible slot can bring the system to 4GB and reduce memory-related pauses; it will not remove limits caused by the PC’s age or other components.
- For a refurbished Elite 8300 used for light office tasks, email, or simple web use, this module can be part of a memory upgrade that helps the older PC handle basic work with fewer memory constraints; demanding modern apps and heavy multitasking may still be limited.
- When an existing memory stick has failed or been removed during repair, this compatible 2GB module can help restore the Elite 8300 to operation, provided the system’s memory configuration and operating system support the resulting capacity.
- A small office keeping an older Elite 8300 for a dedicated, lightweight task—such as a legacy business application or a basic workstation—can use this module as a modest memory refresh, rather than expecting it to turn the PC into a modern high-performance system.
- For a DIY owner maintaining or refurbishing an Elite 8300 Ultra-slim, installing this module is a targeted memory upgrade using the system’s specified SODIMM type; check the current memory layout first, since replacing a stick instead of adding one may not increase total capacity.
Spec Summary
| Attribute | Value |
|---|
| Best For | A 2GB DDR3 SODIMM memory upgrade for the HP Elite 8300 Ultra-Slim |
|---|
| Capacity | 2GB |
|---|
| Module Configuration | 204-pin DDR3 Non-ECC, unbuffered SODIMM; 1Rx8 rank, 1.5V |
|---|
| Speed And Latency | 1600 MHz (PC3-12800), CL11 |
|---|
| System Compatibility | HP Elite 8300 Ultra-Slim |
|---|
| Model Identifiers | OWC; part number 1S6D31R802GB; model number OWC1S6D31R802GB-B421-SF |
|---|
Reference Q&A
Q: OWC 2GB vs 4GB DDR3-1600 for the HP Elite 8300 Ultra-Slim: which should I choose?
A: Choose this 2GB module when you want a smaller capacity addition or to match an existing 2GB module. Choose OWC’s 4GB module when you want more memory capacity from one slot. Both are 204-pin, 1.5V, non-ECC DDR3-1600 SO-DIMMs; the 4GB model is also CL11.
Q: Should I use one OWC 2GB stick or two matching 2GB sticks in an Elite 8300 Ultra-Slim?
A: Choose one 2GB module to add or replace memory in a single slot. Choose two matching 2GB modules for a 4GB total configuration when you want to populate the system’s two memory slots as a pair; HP’s system information identifies two SO-DIMM slots, and paired modules enable dual-channel mode.
Q: OWC 2GB vs 8GB DDR3-1600 for the Elite 8300 Ultra-Slim: which is the bigger upgrade?
A: The OWC 8GB module provides four times the capacity of this 2GB module per stick. Choose 2GB for a smaller capacity addition or to match an existing module; choose 8GB when you want a larger per-slot memory upgrade. The Elite 8300 Ultra-Slim has two SO-DIMM slots and supports configurations up to 16GB, subject to the system configuration and operating system.
Q: Will this RAM work in an HP Elite 8300 Ultra-Slim?
A: The listing identifies this single 2GB module as compatible with the HP Elite 8300 Ultra-Slim. It is 204-pin DDR3-1600 PC3-12800, CL11, 1.5V, non-ECC, and unbuffered. Check your exact system model and memory configuration before buying.
Q: Is 2GB enough, or should I buy this as an add-on?
A: This is one 2GB module, so whether it is enough depends on how much memory is already installed and what the computer is used for. It may suit a small capacity increase or a replacement, but check your total-memory needs before choosing a 2GB module.
Q: Can I install this alongside the RAM already in my computer?
A: Possibly, if there is an available memory slot and the computer supports the module’s specifications. Check the current memory configuration and your system’s requirements first; this product is a single 2GB DDR3-1600, 1.5V module.
Q: Is this memory module easy to install myself?
A: The product listing describes installation as a DIY task in most cases. You will need to access the computer’s memory slot; if you are unsure about opening the system or handling components, consult its service instructions or a technician.
Q: Will this RAM fit an HP Elite 8300 Ultra-Slim?
A: The listing specifies a 204-pin DDR3 SODIMM, the laptop-sized memory type discussed for the Ultra-Slim. Check that your computer is the Ultra-Slim model, not another Elite 8300 form factor, before buying; Reddit discussions distinguish its SODIMM memory from the full-size RAM used in some other 8300 models.
Q: Is a single 2GB module enough for everyday work or browsing?
A: Probably not if the goal is to improve a system that already struggles with browsing. In a discussion about an Ultra-Slim with 4GB, a user reported Chrome lag and asked whether 8GB would suffice; this 2GB module adds only 2GB, so check your current memory and consider the total capacity you need.
Q: Should I buy this 2GB stick or choose a larger RAM upgrade?
A: Choose it if you specifically need a compatible 2GB module—for example, to replace a faulty stick or make a small capacity increase. If you want a substantial upgrade, compare the cost and compatibility of larger modules: Reddit users discussing the Ultra-Slim considered 8GB or 16GB total, while this product is a single 2GB stick.