The OWC 1S6D32R804GB is a 4GB DDR3-1600, 204-pin SO-DIMM memory module designed as a replacement for QNAP RAM-4GDR3-SO-1600; it suits compatible laptops, all-in-one systems, and NAS devices that use 1.5V non-ECC, unbuffered memory.
Recommended For
- Owners of a QNAP NAS whose model documentation specifies a 4GB, 204-pin DDR3-1600 SO-DIMM and supports a non-ECC module, who need a like-for-like replacement or memory addition.
- IT staff or home-lab maintainers keeping a supported older QNAP NAS in service who want a standard 4GB module for a documented memory replacement or upgrade.
- Laptop or all-in-one owners whose system specifically calls for a 4GB, 204-pin DDR3-1600 SO-DIMM and is compatible with its 1.5V, non-ECC specification.
- Users upgrading a compatible system because its documented workload is constrained by available memory, rather than looking for a change to storage or network performance.
Real-World Use Scenarios
- When a compatible QNAP NAS runs backups, synchronization, and other apps at the same time, adding supported memory may give those tasks more room to run; the benefit depends on the NAS model and workload.
- If a QNAP NAS shows memory pressure or swap activity during heavy backup, indexing, or scanning jobs, a supported RAM upgrade may ease the pressure; high swap use alone does not necessarily mean the NAS is malfunctioning.
- For a NAS that is indexing a photo or video library while users browse or transfer files, additional supported memory may help with memory headroom, although indexing can still compete with transfers for system resources.
- When maintaining a compatible QNAP NAS with a failed or undersized memory module, this 4GB SO-DIMM can serve as a replacement or supported expansion; check the exact NAS model and memory configuration before installing it.
Spec Summary
| Attribute | Value |
|---|
| Best For | Laptop, all-in-one system, and NAS memory upgrades; also listed as compatible with laptops |
|---|
| Capacity | 4GB memory module |
|---|
| Memory Type And Configuration | DDR3-1600 (PC3-12800) 204-pin SO-DIMM, CL11, 1.5V, non-ECC, unbuffered, without a heat spreader |
|---|
| Model Identifiers | OWC; part number 1S6D32R804GB; model OWC1S6D32R804GB-B570-SF |
|---|
Reference Q&A
Q: Should I choose this OWC 4GB module or an OWC 8GB DDR3-1600 module?
A: Choose this 4GB module when you need a single 4GB DDR3-1600, 1.5V SO-DIMM. Choose an OWC 8GB module when you want twice the capacity in one slot and your system supports an 8GB module. Both are 204-pin DDR3-1600, PC3-12800 SO-DIMMs; verify the system’s supported capacity before choosing.
Q: Is this single 4GB OWC stick or an OWC 8GB two-stick kit a better fit?
A: Choose this single 4GB module when replacing or adding one stick. Choose the OWC 8GB kit, made of two 4GB modules, when you want 8GB total as a matched pair and your system has two compatible memory slots. Check the system’s capacity and module requirements before purchasing.
Q: Should I get this OWC 4GB 2Rx8 module or an OWC 4GB 1Rx8 module?
A: Both are 4GB DDR3-1600 SO-DIMMs; the distinction is the rank configuration. This product is 2Rx8. Choose the rank configuration specified or validated for your system, and confirm the full module requirements before buying.
Q: How can I tell if this RAM is compatible with my laptop or NAS?
A: Check the device’s manual or specifications for 4GB DDR3-1600 (PC3-12800), 204-pin SO-DIMM memory at 1.5V, non-ECC and unbuffered. Also confirm the device supports a 4GB module and has an available slot if you plan to add memory. The product is listed as a replacement for QNAP part RAM-4GDR3-SO-1600, but that alone does not confirm compatibility with every QNAP model.
Q: Will this work as a replacement for QNAP RAM-4GDR3-SO-1600?
A: The product is described as having the same specifications as QNAP part RAM-4GDR3-SO-1600: 4GB DDR3-1600, 204-pin SO-DIMM, 1.5V, non-ECC and unbuffered. Confirm that your specific NAS model supports this memory specification before ordering.
Q: Can I add this module to the RAM already in my system?
A: Possibly, if the system has an open memory slot and supports the module’s capacity and specifications. Check the system’s maximum memory and slot configuration first; compatibility with an existing module is not guaranteed by this product’s specifications alone.
Q: Who is this 4GB memory module best suited for?
A: It is best suited to replacing a supported 4GB DDR3 SO-DIMM or making a modest memory upgrade in a compatible laptop, all-in-one system or NAS. It is a single 4GB module, so check whether that capacity meets your needs and whether the system can use it.
Q: Will this RAM work in any QNAP NAS?
A: No. This module is a 4GB, 204-pin DDR3-1600 SO-DIMM rated at 1.5V, but compatibility depends on the NAS model’s memory type, voltage, upgrade limit, and whether it has a removable SO-DIMM slot. Check the requirements for your exact model before buying; QNAP community reports describe models with different slot and voltage requirements.
Q: Does the 1.5V rating matter when choosing RAM for a QNAP?
A: Yes. This module is standard 1.5V DDR3, not 1.35V DDR3L. Community reports describe QNAP models that require DDR3L, so confirm the voltage required by your specific NAS before choosing this module.
Q: Can I install the RAM myself?
A: A DIY installation may be possible if your NAS has an accessible SO-DIMM slot, but the steps vary by model. A QNAP upgrade video shows a user replacing RAM in a TS-453A; it does not establish the installation procedure for every QNAP NAS.
Q: Should I choose third-party RAM instead of QNAP-branded RAM?
A: Third-party memory may be a lower-cost option, but community reports show that results vary by NAS model and module. This OWC module is listed as matching the specifications of QNAP part RAM-4GDR3-SO-1600; confirm your model’s requirements, since matching listed specifications alone does not guarantee compatibility.