IN 2026, THE AIR QUALITY DETECTOR HAS UNDERGONE A COMPREHENSIVE UPGRADE!
ONCE AN ABNORMAL INCREASE IN FORMALDEHYDE IS DETECTED OR THE AIR QUALITY FAILS TO MEET THE STANDARDS, MEASURES SHOULD BE TAKEN PROMPTLY! EASILY DEAL WITH AIR POLLUTION AND ENJOY FRESH BREATHING!
ALL-ROUND AIR QUALITY DETECTION
- QUICK RESPONSE
- PER SECOND DETECTION
- HIGH COST-EFFECTIVENESS
SUITABLE FOR VARIOUS USAGE SCENARIOS
ALL-SCENARIO ADAPTATION, COVERING ALL SCENARIOS INCLUDING RESIDENTIAL, OFFICE, MEDICAL, EDUCATIONAL AND TRANSPORTATION PROFESSIONAL-GRADE PRECISE SENSORS AUTOMATICALLY ALARM WHEN THE LIMIT IS EXCEEDED, PORTABLE AND EASY TO USE.
10-in-1 AIR QUALITY DETECTOR
NOTE:
To ensure more accurate data detection, please follow the usage steps!
- First, perform a simple calibration: After turning on the device, place the detector in a ventilated environment or outdoors for 20-30 minutes. At this time, the normal outdoor CO2 concentration is approximately 400 ppm. Then, place it in the environment to be tested. If the CO2 concentration data in the ventilated area or outdoors does not drop to around 400 ppm, double-click the power button, and then place it for 20 minutes before using.
- During charging, the battery will heat up, causing the detected temperature to rise and the humidity to decrease. So it's best not to charge the device during the testing process.
IN 2026, THE AIR QUALITY DETECTOR HAS UNDERGONE A COMPREHENSIVE UPGRADE!
ONCE AN ABNORMAL INCREASE IN FORMALDEHYDE IS DETECTED OR THE AIR QUALITY FAILS TO MEET THE STANDARDS, MEASURES SHOULD BE TAKEN PROMPTLY! EASILY DEAL WITH AIR POLLUTION AND ENJOY FRESH BREATHING!
ALL-ROUND AIR QUALITY DETECTION
- QUICK RESPONSE
- PER SECOND DETECTION
- HIGH COST-EFFECTIVENESS
SUITABLE FOR VARIOUS USAGE SCENARIOS
ALL-SCENARIO ADAPTATION, COVERING ALL SCENARIOS INCLUDING RESIDENTIAL, OFFICE, MEDICAL, EDUCATIONAL AND TRANSPORTATION PROFESSIONAL-GRADE PRECISE SENSORS AUTOMATICALLY ALARM WHEN THE LIMIT IS EXCEEDED, PORTABLE AND EASY TO USE.
10-in-1 AIR QUALITY DETECTOR
NOTE:
To ensure more accurate data detection, please follow the usage steps!
- First, perform a simple calibration: After turning on the device, place the detector in a ventilated environment or outdoors for 20-30 minutes. At this time, the normal outdoor CO2 concentration is approximately 400 ppm. Then, place it in the environment to be tested. If the CO2 concentration data in the ventilated area or outdoors does not drop to around 400 ppm, double-click the power button, and then place it for 20 minutes before using.
- During charging, the battery will heat up, causing the detected temperature to rise and the humidity to decrease. So it's best not to charge the device during the testing process.