
JDR Fog/Snow Machine
Each machine will be sent to you after rigorous testing.
We sincerely hope that our smoke machine can add fun to your party and life!
JDR FM-3 fog machine is easy to operate.

You can choose to turn on the automatic mode, please dance.
You can also choose the manual control mode to send a surprise at the critical moment.
In our factory,there is a team responsible for only one thing every day:
We weed out the Lemon, and you get the nice party.
That is strict inspection of smoke machines before they leave the factory. Smoke function, lights, remote control, power cord... All have been tested.

Simplify Control Operation

1.Add the fog fluid
Fill the tank with the professional fog fluid( not included)
The fog fluid used in the fog machine should be water-based.

2.Start the machine
Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on.

3.Wireless remote control
·Wireless remote control
·Automatic spraying
The machine will be sprayed automatically after preheating is completed, no manual operation is required.

4.Spraying
First warm-up need 2-3 minutes, it can spray 15-30s
Preheating again only need 30-50s,the same spray for 15-30 seconds
Spraying distance of 3-5 meters
JDR AUTO Spraying FM-3 Portable Fog Machine
There are two switches : The power switch is on top.The auto spray switch is below.
Auto Mode - There is an auto button on the JDR FM-3 fog machine.You don't have to do anything on the party. The smoke machine will automatic spraying after each Preheating.
Wireless Remote Control - You can control your fog machine within a 50-meter radius by the wireless controller.

For disinfection, we recommend using aerosol disinfectant.
1. Add atomized disinfectant solution, mix a certain proportion of water according to the instructions of the disinfectant solution.
2.Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on .
3.First warm-up need 2-3 min, when the heating is complete the light is Green,it will not be on while preheating .
It can spray 12-30s, preheating again only need 50-60s,the same spray for 12-30 seconds.
(Produce smoke while keep pressing)
Cautionary Note:
1.Do not connect the plastic pipe to the smoke vent, the high temperature will melt the plastic!
2.We recommend using a fogging solution.The fog fluid used in the fog machine should be water-based.
3.Do not use alcohol as a consumable for sterilization; it can cause a fire when heated.
4.If you can't find the disinfectant fogging solution, look for a disinfectant with Ethyl Alcohol and Polyhydirc Alcohol as the main ingredients.
5.People should leave the disinfection area while the fog machine is being disinfected.
6.Away from the Fire
7.Reasons for not producing fog:
i: The purchased mist solution is not compatible with the equipment.
ii:The proportion of water is too high.
JDR FM-3 fog machine is easy to operate.

You can choose to turn on the automatic mode, please dance.
You can also choose the manual control mode to send a surprise at the critical moment.
In our factory,there is a team responsible for only one thing every day:
We weed out the Lemon, and you get the nice party.
That is strict inspection of smoke machines before they leave the factory. Smoke function, lights, remote control, power cord... All have been tested.
Simplify Control Operation

1.Add the fog fluid
Fill the tank with the professional fog fluid( not included)
The fog fluid used in the fog machine should be water-based.

2.Start the machine
Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on.

3.Wireless remote control
·Wireless remote control
·Automatic spraying
The machine will be sprayed automatically after preheating is completed, no manual operation is required.

4.Spraying
First warm-up need 2-3 minutes, it can spray 15-30s
Preheating again only need 30-50s,the same spray for 15-30 seconds
Spraying distance of 3-5 meters

JDR AUTO Spraying FM-3 Portable Fog Machine
There are two switches : The power switch is on top.The auto spray switch is below.
Auto Mode - There is an auto button on the JDR FM-3 fog machine.You don't have to do anything on the party. The smoke machine will automatic spraying after each Preheating.
Wireless Remote Control - You can control your fog machine within a 50-meter radius by the wireless controller.
Wireless remote control
The effective range is within 50 meters without any barrier.
FCC,CE and RoHS certified
A safe and qualified fog machine that produces great, thick fog as you desired.
For disinfection, we recommend using aerosol disinfectant.
1. Add atomized disinfectant solution, mix a certain proportion of water according to the instructions of the disinfectant solution.
2.Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on .
3.First warm-up need 2-3 min, when the heating is complete the light is Green,it will not be on while preheating .
It can spray 12-30s, preheating again only need 50-60s,the same spray for 12-30 seconds.
(Produce smoke while keep pressing)
Cautionary Note:
1.Do not connect the plastic pipe to the smoke vent, the high temperature will melt the plastic!
2.We recommend using a fogging solution.The fog fluid used in the fog machine should be water-based.
3.Do not use alcohol as a consumable for sterilization; it can cause a fire when heated.
4.If you can't find the disinfectant fogging solution, look for a disinfectant with Ethyl Alcohol and Polyhydirc Alcohol as the main ingredients.
5.People should leave the disinfection area while the fog machine is being disinfected.
6.Away from the Fire
7.Reasons for not producing fog:
i: The purchased mist solution is not compatible with the equipment.
ii:The proportion of water is too high.
JDR Fog/Snow Machine
Each machine will be sent to you after rigorous testing.
We sincerely hope that our smoke machine can add fun to your party and life!

































