Wavlink N300 High Power Outdoor Weatherproof Wifi Repeater/ Range Extender / Access Point / Router / WISP 2.4GHz 300Mbps 1000mW Omnidirectional Antenna, Passive POE,15KV ESD, 4KV Lighting Protection

What Does This Product Do? 570HN2 -- The Wavlink 2.4G 300Mbps Outdoor Access Point provides a cost-effective solution for outdoor wireless network applications. With 1000mW of power and high gain omnidirectional antennas, WN570HN2 can deliver a long distance wireless data transmission. Coupled with weatherproof enclosure, 15KV ESD, 4KV lighting protection, it never be easier to enjoy a stable connection, even when in intense outdoor environments. It was so great solution for your wireless request! Love This High performance outdoor wifi repeater. The 300Mbps AP/Router is mainly used for providing free WiFi service in home-use and big area such as garden, office, factory, community, street or etc.

. The AP/Router can take an existing 2.4GH z wireless signal, repeater and extend it to a longer range where it is too far away for the router or access point to reach.. Build-in High Power Technology. Support Repeater, AP, router Mode.. Features up to 1000 mW of power and enhanced receiver design.. Robust weatherproof case with stands harsh outdoor conditions.. Build in lighting arrester.. Support 3 LEDs wireless signal strength. Enjoy Stable Connection in Harsh Outdoor Environment * Weatherproof enclosure with IP65 certification * 15KV ESD Protection and 4KV Lightning Protection
Passive PoE: Passive power over Ethernet (POE) Support for Flexible Deployment.
Note: Select the Wi-Fi network with a signal strength greater than 70% for the most reliable connection.
Security and Flexible: Provides WEP, WPA/WPA2. WPA-PSK /WPA2-PSK data security, ethernet (POE) Support for Flexible Deployment
Multiple Operation Modes: 570HN2 supports AP, Router, WISP as operation modes. And under AP Router mode, it provides Access Point, Client, Client+Repeater modes for various wireless solutions.

How it work?

1. Place the straps through the slots on the back of the AP/Router and then around the pole Tighten the straps

2. Connect one end of an LAN cable to the POE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router

3. Connect the LAN port of the power inject t a PC using another LAN cable

4. Plug the power adapter into a wall socket

5. The connection will be similar to the figure below after the above steps are finished


What’s in the package?

1 x N300 Outdoor Wi-Fi Range Extender
2 x Omni Antennas 1 x Power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main Body Holder
1 x Screw fitting
2 x Cable ties
1 x Screw Fitting Kit