Upgraded 242193214 Freezer Door Gasket Compatible With Frigidaire Kenmore Crosley White-Westinghouse Refrigerator Seal, Replaces AP5688453 PS7784010 3016410, 28.3 x 42.13" Blaack

Part Number: 242193214 refrigerator door gasket replaces part numbers 242193214, AP5688453, PS7784010, EAP7784010, and
3016410.
Dimensions: 28.3 x 42.13 inches. Please verify the model number and size of your original gasket before purchase. Many door gaskets appear similar but have different model numbers and dimensions. Order according to the model and size, not the product's appearance. This freezer door gasket is compatible with major brands including Frigidaire, Kenmore, White-Westinghouse, and Crosley.
Compatible model numbers include: FFHI2126PB3, FFHI2126PB4, FFHI2126PS4, FFHI2126PS5, FFHI2131QE0, FFHI2131QS0, FFHT2021QB0, FFHT2021QS0, FFHT2021QS3, FFHT2021TB0, FFHT2021TB1, FFHT2117LB8, FFHT2117PS3, FFHT2117PS4, FFHT2126PB1, FFHT2126PB3, FFHT2126PM1, FFHT2126PM3, FFHT2126PS3, FFHT2126PS4, FFHT2131QE0, FFHT2131QM0, FFTR2021QB2, FFTR2021TB0, FFTR20D2QW1, FGTR2042TF1, FGTR2042TP1, FGTR2044QE1, LFTR2021TF5, FFHI2032TE0, FFHI2032TE1, FFHI2032TS0, FFHI2032TS1, FFHI2117LB0, FFHI2117LS0, and others.
Upgraded Thickened Quality: This refrigerator fresh food door gasket is made from food-grade thickened silicone, providing resistance to high and low temperatures, flexibility, and tear resistance. It features a double-layer sealing structure design, combined with a thickened edge and wavy folds, to fit the refrigerator door gap tightly and block cold air leakage. This helps minimize cold air loss and lower energy consumption. It addresses typical refrigerator issues such as: broken or torn door gaskets, worn or dirty gaskets, leaking seals, and condensation/frost/ice buildup inside.
Easy to Install: 1) Due to shipping, the gasket may be folded. Soak it in warm water (60-70°C) for 30 minutes until kinks and creases disappear. 2) Use a hair dryer on a low setting to dry it, checking again that it is flat with no creases or kinks. 3) Remove the old door gasket. 4) Secure the four corners of the new seal first, then press all four sides in turn to align and tighten it on the refrigerator door. 5) Close the door, check for any creases, and use a hair dryer to heat and flatten them. 6) Close the refrigerator door, secure it tightly with tape, and remove the tape after 24 hours.
Maintenance & Notes: - Ensure the new gasket is a perfect match for your refrigerator model, as an improper fit may affect sealing. - Avoid overstretching the gasket during installation to prevent deformation. - If unfamiliar with installation, consult your refrigerator's manual. - Check alignment seasonally, as temperature changes may loosen the seal. After installation, the refrigerator's sealing performance and energy efficiency can be significantly improved