Magcubic 2025 Upgraded HY300PRO Mini Projector with WiFi and Bluetooth, Portable Projector 4K Support, Auto Keystone, 180 Degree Rotation, Smart Proyector for Home Outdoor

1Portable Size2WiFi 6 & Bluetooth 5.43B uilt in Android 144Universal Connectivity1Simple Focus Sharp View2180 Degree Rotation3Big Vision The Image is Tilted? Try the following steps to see if they help:
1. Ensure the projector is properly aligned and that the lens is facing the screen directly.
2. Navigate to Settings > Projection settings > Keystone Correction > Initial angle correction.
3. If the above steps dont resolve the issue, manually adjust the keystone correction by going to Settings > Projection settings > Keystone Correction > Turn Off Auto Keystone Correction > Manual Down Keystone CorrectionIf My App Crashes? 1. Try another Wi-Fi network and update the firmware. Go to Settings > About devices > Online upgrade
2. Check if your time zone is accurate via Settings > Date And Time Setting> Time Zone Selection
3. Clear data via Settings > My Apps > (App Name) > Clear Cache.
4. Reset the projector via Settings > Other Settings > Factory Reset SettingsCan't Connect to Wi-Fi? 1. Place the projector and your router within 16 ft / 5 m of each other. Test if other devices can connect to Wi-Fi.
2. Check if your time zone is accurate via Settings > Date and time Setting
3. Try a different Wi-Fi network or connect to your phone's hotspot.
4. Try your router's 2.4GH z and 5GHz settings.
5. Reset the projector by going to Settings > Other Settings > Restore factory settings. Projection DistanceThe distance between the projector and the projection surface must be a minimum of 0.5 m and a maximum of 3m. This ensures a projection image between 40" and 130". Projector Can't Power On? 1.
Check the Power Indicator: Ensure the power indicator light is on when the power cable is plugged in.
2. Try a Different
Power Cable: Use another functional power cable to see if this resolves the issue.
3.
Update the Firmware: If possible, update the projector to the latest firmware via USB drive. Automatically Shuts Down1. Check for High
Temperature Warnings: See if theres a prompt indicating the projector has shut down due to high temperature.
2.
Check the Fan Operation: Confirm whether the fan is running. If needed, open the projector and reconnect the fan cable. - If the fan is working, update the projector to the latest firmware via USB drive. - If the fan is not working, consider replacing it. Remote Control Is Not Work? 1.
Replace the Batteries: Insert new batteries, ensuring the positive and negative poles are correctly aligned. Reversed polarity will prevent the remote from working.
2. Use a Wired
USB Mouse: Connect a wired USB mouse to control the projector as an alternative.
3.
Contact Support: If the issue persists, reach out to support for a replacement remote controlImage Has Lines or Is Flashing1.
Restore Factory Settings: Go to Settings > Other Settings > Factory Reset to reset the projector to its original settings.
2.
Update Firmware: Go to Settings > About Device > Online Upgrade to update the projector to the latest firmware version.
3.
Check the Screen Cable: If the issue persists, carefully disassemble the device and gently move the screen cable. If the lines shift as the cable moves, the screen may be faulty and will likely need replacement. Projected Image Appears Burnt? 1.
Check Fan Operation: Confirm that the fan is working properly and that hot air is being discharged from the exhaust port. Ensure nothing is blocking the machines heat dissipation.
2. Re-plug or Replace the
Fan: If the fan isnt working, you may need to disassemble the projector to re-plug the fan cable or replace the fan.
3.
Inspect the Screen: If the above steps dont resolve the issue, the screen may be faulty and will likely need replacement. How to Get a Squared Image? 1. Ensure the projector is properly aligned with the lens facing the screen directly. 2. Go to Settings > Projection Settings>Keystone Correction > Initial Angle Correction.
3. If needed, manually adjust by turning off Auto Keystone FAQ