Replacement Projector Air Filter ELPAF27 / V13H134A27 for EPSON EB-440W EB-450W EB-450Wi EB-460 EB-460i

For projectorsprojector air filter plays an important role.Using JISIZKYs projector air filter in your projector not only ensures heat dissipation and ventilation but also can prevent paricles in the air from entering the projector, effectively filtering more than 99% of particles in the air. It greatly improves the filtering effect and efficiency, and effectively protects the entire optical system of the projector. Adapting to the use of projector air filter in different environment no matter small or large dust.
Projector Air Filter Model: ELPAF27 / V13H134A27
Compatible For EPSON Projector Models:
EB-440W EB-450W EB-450Wi EB-460 EB-460i Projector
Filter frame:ABS
Filter:Polyurethane foam
You need to replace the air filter in the following situations:
1,lf the message is displayed frequently even though the air filter has been cleaned,replace the air filter.
2,If dust is difficult to remove or the air filter is torn or damaged, replace the air filter.
Filter Replacement Guide:
1,Turn off the projector and unplug the power cord.
2,Remove the air filter cover.(Press the knocks to release the catches,and then pull the cover upward.)
3,Remove the old air filter.
4,Insert the new air filter and push gently until it clicks into place.(Install with the groove faced to the right)
5,Close the air filter cover.
NOTE:
If regular maintenance is not performed, your projector will notify you when the temperature inside the projector has reached a high level.
Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.