Red/Green/Blue/Purple Laser Beams with 800 Lumens Flashlight for Pistols, 3 in 1 Laser Light Combo, Tactical USB Rechargeable Laser Sight, Strobe & Steady Flashlight for Picatinny Rail

This is a Class 3R laser product with an output power under 5mW.
Blue Laser wavelength: 440-460nm.
Purple Laser wavelength: 395-415nm.
**Quick USB Rechargeable**
The purple and blue laser unit features integrated USB charging.
Charging requires only 2 hours.
Operating durations: 6 hours per laser, 1.2 hours for the light, and 55 minutes with both laser and flashlight active.
A red low-power indicator illuminates when power falls below 10%, signaling it is time to recharge.
A green light indicates a full charge.
**8 Sighting Modes + Strobe Function**
This 3-in-1 purple and blue laser flashlight combo provides 8 sighting modes: Purple Laser Only, Blue Laser Only, Purple Laser Light, Blue Laser Light, Steady Light, Strobe Light, Purple Laser Strobe Light, and Blue Laser Strobe Light.
Press the light button for 3 seconds to switch to strobe mode.
**Two Brightness Levels & Strobe Mode**
Quickly double-click the light switch to cycle between different brightness levels (low brightness 200 lumens, high brightness 800 lumens).
Long press the light switch to activate the 800-lumen high-brightness strobe mode.
**Only One Screw Required + Invisible Screw**
The gun laser sight offers 2 alternative screw holes.
Select your preferred one and use just one screw to mount the sight securely on a standard 21mm wide rail with a screw slot.
The invisible screw design helps prevent scratching skin and clothing.
**21MM Wide Picatinny Rail + 1.0 Inch Installation Space**
For correct installation, the following two conditions must be satisfied:
1.
A standard 21mm wide Picatinny rail with a screw slot.
2.
The installation space from the trigger guard to the screw slot must measure between 1.0 and 1.3 inches.
If these conditions are not met, this 3-in-1 laser flashlight combo will not fit your pistol.
**Windage & Elevation Adjustment**
The elevation (UP/DOWN) adjustment features two separate holes, one for the purple laser and one for the blue laser.
For elevation, turning clockwise moves the laser point down.
For windage, turning clockwise moves the laser point left.
To safeguard the unit, please adjust elevation and windage gently and interactively.
Using excessive force to calibrate in one direction may cause damage