4K120Hz Dual DisplayPort Splitter for 2 Monitors Extended Display Port to Dual DP Splitter 1 in 2 Out Adapter for Laptop Computer PC and Graphics Card

Displayport Splitter for
Dual Monitors: This Display Port splitter converts one DisplayPort signal into two DisplayPort outputs supporting one-way transmission only from a single DP source to two DP displays. Your computer must have a DP 1.2 or higher compatible graphics card and use a DP 1.4 (or above) standard cable no longer than 3.3 ft. Windows systems support both extended and mirror modes while Mac only supports mirror modePlease
Check Compatibility: The dp splitter requires your computer has a DP port or your mini pc and desktop graphics card is one of the following models.
mini PC: A-SUS ExpertCenter Beelink SER8/SER9/SER5 D-ell OptiPlex H-P EliteDesk In-tel NUC 12 Enthusiast Minisforum Venus.
Graphics Card: AM-D Radeon RX7000/6000 AAEO-N GAR-A750E In-tel Arc A750/A770/A680 NVI-DIA GeForce RTX/GTX. Please check the second picture and the second Product Description picture for compatible models4K Ultra HD VideoDual monitor connector 1 in 2 out supports up to 4K120Hz (3840X2160P120Hz) resolution to extend your display to multiple monitors. Single DisplayPort output resolution up to 4K60Hz backward compatible with 2K120Hz/60Hz 1080P120Hz/60Hz; Dual screen resolution up to 4K60Hz/30Hz. (Make sure your input and output devices both support the same resolution) bringing you more stunning picture color and contrast.
Note: Please use DP 1.4 of the cable with a length of not more than 6FtMirror
& Extended Modes: Windows systems support both mirror and extended modes while Mac systems only support mirror mode. A DisplayPort 1.4 compatible graphics card is required to achieve 4K60+4K144Hz or 4K120Hz+4K120Hz output.
Note: Some computers require manual resolution adjustment and configuration to extended or mirror mode. Ensure your DP cables meet the DP 1.4 standard to prevent any impact on video qualityPlug and
Play: The dp splitter dual monitor features a flexible input design without attached cables allowing connection of different DP cable lengths based on your needs. No drivers are required for quick dual-screen setup. Simply connect the DP interface to your signal source (computer/graphics card) and power the splitter using the included USB-C cable.
Important: You must use the device's native DP port (no docking stations/adapters/converter cables allowed)Stable PerformanceThe aluminum alloy casing ensures excellent heat dissipation. Your computer must be equipped with a native DisplayPort and connected directly to the splitter's DP input port. Please note that DP cables are not included and must be provided by the user connect the USB-C power cable for proper operation. We offer replacement service within 12 months. Please contact us promptly if you have any questions