Meet Your Seller
ETH-USB-HUB-BOX Ethernet USB Hub Kit with ABS Case 1x RJ45 10/100M Port 3x USB 2.0 Ports USB 2.0/1.1 Compatibility For Raspberry Pi Zero 2W/2WH/Zero W/Zero WH/Zero
- ETH/USB HUB HAT (B) and ABS case form a matched kit, with case cut-outs aligned to the board connectors for Raspberry Pi Zero series boards.
- Compatible with Raspberry Pi Zero 2W, Zero 2WH, Zero W, Zero WH, and Zero boards through the integrated pogo pin connection design.
- Adds three USB ports with compatibility for USB 2.0 and USB 1.1 devices, expanding connectivity for supported Raspberry Pi Zero boards.
- Provides one RJ45 Ethernet port with 10/100M auto-negotiation for wired network connectivity through the integrated Ethernet interface.
- Incorporates an RTL8152B Ethernet chip within the board design to support the included RJ45 10/100M Ethernet port.
- The compact case uses an angle-rounded design with a smooth hand feel and a simple snap lid for convenient assembly and removal.
- Made from ABS material with a dull-polish, anti-fingerprint surface; the case design helps keep the Raspberry Pi Zero away from dust.
- Includes two different lids that can be changed as needed, with the alternate lid allowing attachment of other Zero HATs.
- Package includes one ABS case, four rubber feet, one screws pack, and one screwdriver in addition to the ETH/USB HUB HAT (B).
Any questions? Ask CelesteSM will help you find out quickly.
Product Description:
The ETH-USB-HUB-BOX is an Ethernet and USB hub kit featuring an ETH/USB HUB HAT (B) board inside an ABS case. Designed for Raspberry Pi Zero series boards, it adds one RJ45 Ethernet port and three USB ports while providing a fitted enclosure with connector-aligned cut-outs.
Core Selling Points:
The hub supports 10/100M Ethernet with auto-negotiation through the RTL8152B Ethernet chip and expands connectivity with three USB ports compatible with USB 2.0 and USB 1.1. Its pogo pin design enables direct connection with Raspberry Pi Zero, Zero W, and Zero WH boards. The ABS case has a smooth dull-polish, anti-fingerprint surface, rounded corners, and a simple snap-fit lid. Two different lids are included and can be changed as needed, allowing attachment of other Zero HATs.
Technical Specifications:
Model: ETH-USB-HUB-BOX. Board: ETH/USB HUB HAT (B). Ethernet interface: 1x RJ45, 10/100M auto-negotiation. USB interfaces: 3x USB 2.0, compatible with USB 2.0 / 1.1. Ethernet chip: RTL8152B. Connection design: pogo pins for direct connection. Case material: ABS. Case finish: dull polish, anti-fingerprint. Compatible boards: Raspberry Pi Zero 2W, Zero 2WH, Zero W, Zero WH, and Zero.
Package Contents:
ETH/USB HUB HAT (B) x1; ABS case x1; Rubber feet 4PCS x1; Screws pack x1; Screwdriver x1.
Before Purchase:
Confirm that your board is one of the listed Raspberry Pi Zero series models: Zero 2W, Zero 2WH, Zero W, Zero WH, or Zero. The expansion provides one RJ45 Ethernet port and three USB ports; USB compatibility is USB 2.0 / 1.1. The case is designed specifically around the connector layout of the listed boards.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by GeekSpace Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















