MILL-ROSE, 70664, 1" x 260" Blue Monster PTFE Thread Seal Tape, Plumbers Teflon Tape

MILL-ROSE, 70664, 1" x 260" Blue Monster PTFE Thread Seal Tape, Plumbers Teflon Tape. Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 260" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n.

It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. It can be used on pipes carrying the following: Acids, concentrated (see precautions) and Acids, dilute
Alcohols, Gasohol
Aliphatic solvents, Aromatic solvents, Chlorinated solvents
Ammonia, liquid
Caustics, concentrated (see precautions) Compressed air, Steam, Water
Cutting oils
Diesel fuel oil
Ethylene glycol, Glycerine
Fatty acids
Heating oils, Kerosene
Hydraulic fluids, Hydraulic oils
Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid
Jet fuel
Ketones, Petroleum solvents
Liquid Petroleum Gas, Natural gas
Mineral oils, Vegetable oils
Nitrogen, gaseous and liquid
Soap, liquid
Features: Characteristics Compatible with a broad range of gases and liquids Compatible with a broad range of piping materials Will not harden or crack on the joints Effective across a broad range of temperatures and pressures Acts as a thread lubricant and anti-seize Prevents electrolytic corrosion of threads No curing time Unlimited shelf life Non-flammable Non-toxic Clean
Specifications:
Pigment Color: Blue
Length:
260"Thickness: 0.0035"
+/- 10%Density: 0.8
g/cm3Elongation: >100%Tensile
Strength: 15N
/ mm2Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10, 000 PSI or 69, 000kPaNote: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature Range: -450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500o F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames. Fittings above 1½" (38mm) diameter. Use 3/4" (19mm) wide tape for fittings up to 2" (51mm) in diameter. Use 1" (25mm) wide tape for fittings larger than 2" (51mm) in diameter. Follow the directions under "Instructions". Precautions
Note: Keep Mill-Rose Blue Monster Thread Sealing Tape clean. Replace the clip on the spool after use. Store in a clean place. PTFE is virtually chemically resistant to all media, however there are a few exceptions. Alkali metals such as elemental sodium, potassium and lithium are to be avoided. These alkali metals remove fluorine from the polymer molecule. Extremely potent oxidizers such as fluorine (F2) and