here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
TPL5110 Low Power Timer Breakout Module, 20uA Standby Nano Power Timer Board, Programmable Power Gating Timer for IoT Battery Sensor Projects
- 1. Ultra low standby current around 20uA, ideal for battery-powered long-running devices; 2. Programmable timing range from 100ms up to 7200s (2 hours), adjustable by resistor; 3. Built-in MOSFET driver, supports periodic power gating and one-shot trigger mode; 4. Wide working voltage 1.8V to 5.5V, compatible with most MCU and sensor circuits; 5. Compact breakout design with clear pinout, easy wiring for DIY and embedded development
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
TPL5110 nano-power timer breakout board is designed for duty cycle power control, helping cut power consumption of battery IoT sensors and low-power data loggers. It can automatically switch the load power on and off on schedule. It supports both cycle timer mode and one-shot mode, and accepts a DONE signal from your main controller to shut down power safely. The small form factor is friendly for wearable electronics, remote monitoring nodes and low-power embedded projects. No complicated firmware required for basic timing functions.
Chip: TPL5110 Nano-Power
Timer Standby Current: Approx 20uA
Supply Voltage: 1.8V ~ 5.5V
Timing Range: 100ms to 7200s (2 hours)
Adjustment Method: External resistor
Working Mode: Periodic timer / One-shot trigger
Function: Power gating, MOSFET drive
Application: IoT sensor, battery logger, home automation, low-power DIY circuit
Operating Temp: -40°C ~ 105°C
Note: Timer accuracy is about 1% typical
Specifications
Brand: AJMRTCChip: TPL5110 Nano-Power
Timer Standby Current: Approx 20uA
Supply Voltage: 1.8V ~ 5.5V
Timing Range: 100ms to 7200s (2 hours)
Adjustment Method: External resistor
Working Mode: Periodic timer / One-shot trigger
Function: Power gating, MOSFET drive
Application: IoT sensor, battery logger, home automation, low-power DIY circuit
Operating Temp: -40°C ~ 105°C
Note: Timer accuracy is about 1% typical
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Rufei Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...