GunSkins AR-15/M4 Style Mag Skin for Airsoft (America)

AR-15/M4 Style Mag Skins are Do It Yourself Vinyl Wraps for Airsoft Magazines

Cover and protect your airsoft magazine with a GunSkins AR-15/M4 Style Mag Skin! Our precut template makes installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.

GunSkins AR-15/M4 Style Mag Skins are designed to fit airsoft, BB, or paintball magazines. The kit includes pieces for the left and right sides of a single magazine. It may be required to trim along the edge of your mag for the perfect fit.

AR-15/M4 Style Mag Skin Kit Template with Precut Pieces

GunSkins AR-15/M4 Style Mag Skins will fit any brand magazine. The DIY vinyl wrap kit is generic and requires the user to trim to fit their specific model. The kit comes with the following precut pieces to install on a single magazine:

• Left mag (installed first)


• Right mag (installed second)

They are waterproof and have a non-reflective matte finish. AR-15/M4 Style Mag Skins conform to any shape and are easy to install. For smaller capacity magazines, install centered and trim away excess material for the perfect fit.

Pistol Skins are available in a variety of tactical, hunting, and specialty camouflage patterns.

Frequently Asked Questions

Why won't the vinyl stick to the surface of my magazine?

You must thoroughly clean the mag before installing the wrap. Use a gun-specific degreaser and a small brush, scrubbing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.

Can the wrap be removed?

GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.

Is it waterproof?

The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.

Step by Step Installation Instructions

Clean the Surface.

Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.

A clean gun makes for a clean install.

Peel and Stick.

Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.

If need to, peel off and reposition until you are satisfied with the placement.

Heat and Trim.

Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Take your time and work away wrinkles and air bubbles.

Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.