GunSkins Pistol Accent Skin for 1911 Airsoft (GS Bombshell Blonde)

Pistol Accent Skins are Do It Yourself Vinyl Wraps for 1911Style Airsoft Pistol

Cover and protect your airsoft handgun with a GunSkins Pistol Accent Skin! Our precut template makes installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.

GunSkins Pistol Accent Skins are designed to fit any 1911 style airsoft, BB, or paintball pistol. The kit includes pieces for the left and right grips, one piece for the slide, and six mag skins. It is required to trim along the slide for the perfect fit.

Pistol Accent Skin for 1911 Kit Template with Precut Pieces

GunSkins Pistol Accent Skins will fit any 1911 pistol up to 8" in length. The DIY vinyl wrap kit is generic and requires the user to trim to fit their specific model. The kit comes with the following precut pieces:

• Two grip pieces


• One 3.75 x 8 slide piece


• Six mag skins

They are waterproof and have a non-reflective matte finish. Pistol Accent Skins conform to any shape and are easy to install. If your gun is longer than 8", the Pistol Accent Skin may not contain enough material to cover the entire slide.

Pistol Accent Skins are available in a variety of patriotic, lifestyle, and camouflage patterns.

Frequently Asked Questions

Why won't the vinyl stick to the surface of my gun?

You must thoroughly clean the gun before installing the wrap. Use a gun-specific degreaser and a small brush, scrubbing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.

Can the wrap be removed?

Pistol Accent Skins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.

Will my holster affect the material?

Yes, holsters will create friction and rub against the vinyl along the edges of the gun. If the holster is adjustable we recommend loosening it accordingly. Otherwise, early wear is inevitable.

Step by Step Installation Instructions

Clean the Surface.

Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.

A clean gun makes for a clean install.

Peel and Stick.

Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.

If need to, peel off and reposition until you are satisfied with the placement.

Heat and Trim.

Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Take your time and work away wrinkles and air bubbles.

Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.