Wireless HDMI Transmitter and Receiver,500m(1640ft) Wireless HDMI Extender with Loop Out, 5.8GHz 1080P for Streaming from DSLR,Laptop,Netflix,YouTube to TV/Projector, Up to 6 RXs (DT263W-C RX ONLY)

[Up to 500m Stable Transmission Range] The wireless HDMI transmitter and receiver features a dual antenna design, 2.4 / 5.8G high-speed transmission and a strong signal. By using WiFi transmission technology and through the point-to-point connection between transmitter and receiver equipment, it extends 1080P full HD HDMI signal wirelessly up to 1640ft in an open field without interference.
Note: Walls, bricks or glass can shorten signal coverage or cause severe signal loss for the wireless HDMI transmitter and receiver kit. [4K Decoding, 1080p Wireless Transmission] The wireless HDMI transmitter and receiver input/output resolution supports 4K decoding and up to Full HD 1080p @60Hz; the image is clear and stable, very smooth, colorful, and high sound quality without noise.
Note: 0.1 s latency for real-time games and sports programs. [Plug & Play, Loop Out] Setup of the wireless HDMI transmitter and receiver is quick and easy, no software to install, eliminates cable clutter, and gets you up and running in minutes with a true plug-and-play experience. Connect the transmitter to the HDMI source, then connect the receiver to the secondary HDTV, and you're ready to go. The HDMI local output on the transmitter acts as a distributor and provides an additional output for use by the local display. [Wide Compatibility] This wireless video HDMI display kit works with TVs and projectors with an HDMI input. The device wirelessly connects to most cable, satellite, Blu-ray, set-top boxes, DVRs, laptops, TVs, monitors, AV receivers, computer systems and other media with an HDMI output. Excellent for indoor use such as home entertaining/office/conference/teaching/church projection, and outdoor usage for live camera/live sports/outdoor theater/photographic work etc. [Support Maximum 1TX to 6RXs] Support 1 TX to 1 RX (1640FT/500M), 1 TX to 2 RX (1312FT/400M), 1 TX to 3 RX (985FT/210M), 1 TX to 4 RX (820FT/190M), support max up to 6 RXs.

[Special Designed for Camera] The wireless HDMI transmitter and receiver is designed for camera based on a 1/4 screw hole on the top and bottom of the HDMI transmitter and receiver; it ensures seamless connection with the camera. The backside of the wireless transmitter and receiver supports NP battery, which makes it easier for long time use, and the wireless HDMI transmitter and receiver can be powered by multiple ways including power bank, NP-F
series batteries (Note: NP-F batteries are not included), or via USB-C ports