GELRHONR OBD Power Cable for Dash Camera
- GELRHONR OBD2 power to Mini USB Cable, fits for most dash cameras, GPS, radar, and dash cams.
- Plug and play: Simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics.
- Only for Charging: Obtaining power from OBD interface only, no interference in other OBD data communication.
- L shaped mini usb plug: Perfect when the camera port is on the sides, and not block your view a little more.
- Length: 3.5M/11.5Ft. The cable is long enough to be routed across under the dash, up the A pillar and to the center of the window.
- Attention: Please make sure your dashcam fits Mini-USB Port. This dashboard cam power cord OBD2 does NOT support new energy vehicles.
- Pre-purchase compatibility warning: This obd cable may not fit some vehicle model/dashcam which use A8-B8 signal pins. If you have any questions, our service team will provide you with a satisfactory solution within 24 hours
This OBD to Mini USB power adapter uses A5-B5 pin. Fits for most dash cam, GPS and other in-vehicles devices with MINI USB port. May not be compatible with some dashcam which use A8-B8 signal pins
2 working mode
- MODE“—”: will active your Dash Cam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; Input:DC11.6V-36V Output:DC5V/3A
- Mode“O”: The obd mini usb power cable will power off after 5 minutes when your ACC is off. Input: DC12.8V-36V Output: DC5V/3A
GELRHONR OBD Power Cable for Dash Camera
- GELRHONR OBD2 power to Mini USB Cable, fits for most dash cameras, GPS, radar, and dash cams.
- Plug and play: Simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics.
- Only for Charging: Obtaining power from OBD interface only, no interference in other OBD data communication.
- L shaped mini usb plug: Perfect when the camera port is on the sides, and not block your view a little more.
- Length: 3.5M/11.5Ft. The cable is long enough to be routed across under the dash, up the A pillar and to the center of the window.
- Attention: Please make sure your dashcam fits Mini-USB Port. This dashboard cam power cord OBD2 does NOT support new energy vehicles.
- Pre-purchase compatibility warning: This obd cable may not fit some vehicle model/dashcam which use A8-B8 signal pins. If you have any questions, our service team will provide you with a satisfactory solution within 24 hours
This OBD to Mini USB power adapter uses A5-B5 pin. Fits for most dash cam, GPS and other in-vehicles devices with MINI USB port. May not be compatible with some dashcam which use A8-B8 signal pins
2 working mode
- MODE“—”: will active your Dash Cam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; Input:DC11.6V-36V Output:DC5V/3A
- Mode“O”: The obd mini usb power cable will power off after 5 minutes when your ACC is off. Input: DC12.8V-36V Output: DC5V/3A