USB 3.0 HDD Docking Station, Dual-Bay 2×USB 3.0 & 12V/3A, 5Gbps | USB 3.0 to SATA; 2.5/3.5" HDD/SSD; Offline Clone A to B; UASP/TRIM; Bus Power 5V SSD; 36TB Capacity; Hot-Swap; Plug & Play

Wavlink USB 3.0 to Dual Bay SATA Adapter, Fully "Expand" the Joy of Your Life

A universal USB 3.0 to dual-bay SATA cable, compatible with most 2.5-inch and 3.5-inch SATA SSDs/HDDs on the market. Connect your desktops, notebooks and other devices through the USB 3.0 port with transmission rate up to 5Gbps. This hard drive docking station allows you to read 2 hard drives at the same time, each capacity can be up to 18TB. One-button offline cloning can be easily operated to make data backup more convenient. Equipped with two additional USB 3.0 ports that support BC1.2 fast charging and along with 0.5 meters' USB-A cable. Support plug and play, small and portable, it is an essential companion for digital enthusiasts.

Easy Setup for Plug and Play

1. Insert the hard drive into the SATA connector and make sure your HDD/SSD is mounted correctly;
2. Plug the adapter in a power outlet and connect it to the sata adapter. (For 2.5'' hard drives might not be needed);
3. Connect the USB 3.0 cable to your laptop (the LED light on the adapter will blink), then you can start using.

Notes:

The new disk window may pop up or you have to find it in ''This PC'' then start using it.

Please make a partition for the new hard drive disk at the first use.

Please remember to safely remove the USB adapter on your PC/laptop first then remove manually.

One-Button Offline Clone

Simply pressing "Clone" button to backup files from one hard drive to another (No need to connect with PC). Whether you need a hard drive cloner or an ssd cloner, this feature handles both with ease.

How to operate Offline Clone (A to B)?

1. Insert your SATA HDD/SSD into adapter's A/B ports (Capacity requirement: BA) and connect the power supply;
2. Start clone by pressing Clone Button 3 seconds, then releasing and quickly clicking it at a time;
3. Four LED lights indicate the cloning process (25%, 50%, 75%, 100%). Work is done when all indicators light up;
4. Connect the target drive B with your PC and set its status into "Online" in Disk Management.

Notes:

Make sure that the USB cable is disconnected from any computer during the cloning.

Please backup files before cloning. Any files in the target hard drive will be overwritten when offline cloning occurs.

Multi-scenes applicable: Widely used in home and office with connecting to laptops, routers, smart TVs, PS3/4, Xbox, simply to realize expanding file storage, watching movies and playing games.

Large capacity supported: This dual-bay adapter enables you to connect with two of HDDs or SSDs at the same time, supports with expanding a maximum 18TB×2 large capacity. As a reliable hard drive dock and hdd dock, it handles all your data storage needs.

Additional USB 3.0 ports: Two built-in USB 3.0 Type A ports support fast charging for your mobile phone or other compatible devices and support other extended functions of USB port.

LED indicators: One red-light power indicator and four blue-light working status indicators, which help you easily obtain the information of the adapter's power status and cloning progress.

Auto-sleep mode: The auto-sleep mode is supported for 15-minute no data transferring of the adapter, which effectively helps to extend the lifespan of your hard drives.

Specification

• The maximum dat