
Questions & Answer
- The flash trigger set is designed for photographic studio and on-location work to trigger various flashlights.
- The transmitter is attached to the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash. It can Speedy frequency regulation and is convenient for photographers to shoot.
1. Q: The transmitter can't send a signal ?
- A: Please check whether the transmitter is taken away the transparentfilm.When they are set up in the same channel,you can press the test button to test the signal,the light on the transmitter and receiver will become red.
2. Q: The receiver can't receive the signal or have no response?
- A: Please check whether the receiver switch on the side is on and installed the 2*1.5V AAA batteries,the most important is set up in the same channel as the transmitter.
3. Q: The flash trigger cannot trigger the flash light?
- A: Please check the flash light whether is set up in the same channel as the trigger,the sync cord or the hot shoe mount is completely connected.
4. Q: Does other brands of flashes can be suitable for this CT-16 flash trigger kit ?
- Yes,this trigger kit comes with the standard 3.5mm sync cable and 6.35mm covert adapter,it makes sure that you can use them to widely compatible with other brands of strobe flash.
5.Q:Does this flash trigger is compatible with Canon,Sony,Nikon Camera?
- There are too many major brands of cameras, but the camera model of the standard hot shoes is generally matched, please check the hot shoes head pictures to determine whether it matches your cameras.(Please understand that some models may not be compatible)
OPERATION CAUTIONS

Please be set up on the same channels
- The transmitter and receiver need to be set up on the same channel.Then,can test the signal between the transmitter and receiver.
- 16 groups of channels designed to easily avoid interference between multiple transmitters.

Please take out the transparent film
- Before use the transmitter,please take out the transparent film on the transmitter.

Need to install the batteries
- The receiver need to be installed 2*1.5V AAA batteries.

- Not Compatible with Canon EOS Rebel SL3/2500D,rEBEL t7/1500D/2000D/Rebel T100/3000D/4000D.
- Compatible with Sony models which have the Mi hot shoe (this brand use the special hot shoe)
Specification:
- Channel: 16 Groups
- Sync cable jack: Support 6.35/3.5 mm ports
- Outdoor working distance: =30 meters (open area)
- Indoor working distance: =20 meters (open area)
- Transmitter frequency: 433MHZ Wireless transmission
- Synchronized time: 1/250s
- Transmitter power: 12V 23A battery
- Receiver power: 1.5V (AAA*2 battery )

Not Compatiblity:
- Not compatible with Nikon SB800


Godox Flash Trigger Package Contains
- 1*CT-16 transmitter
- 2*CT-16 receiver
- 2*Sync cable
- 2*Convert adapter
- 1*Clean cloth
![]() 2pcs Godox MS300 600W Studio Strobe Flash Kit Bowens Mount Lighting,2.4G Wire... | ![]() Godox 2pcs MS300V 600W Studio Strobe Flash Light Kit,2.4G Bowens Mount Lighti... | ![]() Godox 800Ws 2Packs SK400II 2.4G Studio Strobe Flash Light Kit,GN65 5600K Mono... | ![]() Godox AD600BM Outdoor Strobe Flash,Bowens Mount 600Ws GN87 High-Speed Sync Ph... | ![]() X3 Flash Trigger | ![]() Godox Quick Release Parabolic Softbox,QR-P70 27.5”/70cm Portable Bowens Mount... | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — no data | — | — | — no data | — |
| Model | MS300 | MS300V | SK400II | AD600BM | X3 | QR-P70 Parabolic Softbox |


Questions & Answer
- The flash trigger set is designed for photographic studio and on-location work to trigger various flashlights.
- The transmitter is attached to the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash. It can Speedy frequency regulation and is convenient for photographers to shoot.
1. Q: The transmitter can't send a signal ?
- A: Please check whether the transmitter is taken away the transparentfilm.When they are set up in the same channel,you can press the test button to test the signal,the light on the transmitter and receiver will become red.
2. Q: The receiver can't receive the signal or have no response?
- A: Please check whether the receiver switch on the side is on and installed the 2*1.5V AAA batteries,the most important is set up in the same channel as the transmitter.
3. Q: The flash trigger cannot trigger the flash light?
- A: Please check the flash light whether is set up in the same channel as the trigger,the sync cord or the hot shoe mount is completely connected.
4. Q: Does other brands of flashes can be suitable for this CT-16 flash trigger kit ?
- Yes,this trigger kit comes with the standard 3.5mm sync cable and 6.35mm covert adapter,it makes sure that you can use them to widely compatible with other brands of strobe flash.
5.Q:Does this flash trigger is compatible with Canon,Sony,Nikon Camera?
- There are too many major brands of cameras, but the camera model of the standard hot shoes is generally matched, please check the hot shoes head pictures to determine whether it matches your cameras.(Please understand that some models may not be compatible)
OPERATION CAUTIONS

Please be set up on the same channels
- The transmitter and receiver need to be set up on the same channel.Then,can test the signal between the transmitter and receiver.
- 16 groups of channels designed to easily avoid interference between multiple transmitters.

Please take out the transparent film
- Before use the transmitter,please take out the transparent film on the transmitter.

Need to install the batteries
- The receiver need to be installed 2*1.5V AAA batteries.

- Not Compatible with Canon EOS Rebel SL3/2500D,rEBEL t7/1500D/2000D/Rebel T100/3000D/4000D.
- Compatible with Sony models which have the Mi hot shoe (this brand use the special hot shoe)
Specification:
- Channel: 16 Groups
- Sync cable jack: Support 6.35/3.5 mm ports
- Outdoor working distance: =30 meters (open area)
- Indoor working distance: =20 meters (open area)
- Transmitter frequency: 433MHZ Wireless transmission
- Synchronized time: 1/250s
- Transmitter power: 12V 23A battery
- Receiver power: 1.5V (AAA*2 battery )

Not Compatiblity:
- Not compatible with Nikon SB800


Godox Flash Trigger Package Contains
- 1*CT-16 transmitter
- 2*CT-16 receiver
- 2*Sync cable
- 2*Convert adapter
- 1*Clean cloth
![]() 2pcs Godox MS300 600W Studio Strobe Flash Kit Bowens Mount Lighting,2.4G Wire... | ![]() Godox 2pcs MS300V 600W Studio Strobe Flash Light Kit,2.4G Bowens Mount Lighti... | ![]() Godox 800Ws 2Packs SK400II 2.4G Studio Strobe Flash Light Kit,GN65 5600K Mono... | ![]() Godox AD600BM Outdoor Strobe Flash,Bowens Mount 600Ws GN87 High-Speed Sync Ph... | ![]() X3 Flash Trigger | ![]() Godox Quick Release Parabolic Softbox,QR-P70 27.5”/70cm Portable Bowens Mount... | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — no data | — | — | — no data | — |
| Model | MS300 | MS300V | SK400II | AD600BM | X3 | QR-P70 Parabolic Softbox |


















































