Blizzard Lighting Oberon Profile NZ (black)

Oberon Profile NZ narrow zoom 15-28 degree

The Blizzard Lighting Oberon Profile NZ is equipped with a 200W high-intensity 3200K tungsten COB LED and offer an incredible CRI of
95. The light quality is comparable to natural sunlight and incandescent lighting while consuming much less energy. They provide rich and accurate color rendition natural skin tones and can deliver brightness with ease!

Users can manually zoom and focus the fixtures via two locking adjustment knobs located on the side of the housing. One knob controls the zoom/beam angle and the other controls the focus. When the knobs are loosened they easily slide back and forth to allow for a smaller or larger spot with either a soft or sharp finely focused edge.

It comes equipped with a stainless-steel shutter blade assembly an attachable color gel frame gobo holder and can be used in standalone or master/slave mode with multiple units using simple 1-channel DMX mode or 2-channel DMX mode with master dimming and built-in strobe effects (1-20 fps).

They have an easy-to-use 4-button LCD menu that offers quick access to DMX address and master/slave settings 0-100% manual dimming demo mode (off/on/strobe) and fixture reset. They are also equipped with 3/5-pin DMX In/Out jacks and PowerCon compatible AC power In/Out connectors which allow users to safely power link up to 5 fixtures.

Power
Voltage: 100-240VAC 50-60 Hertz
Power Consumption: 250W

Optical
1x 200W Tungsten 3200K COB LED 50000 hours
15-28 degree zoom (Profile NZ)
Luminous Flux: 17000lm/18000lm CRI: 95Ra
Gobo Size: 85mm image size 60mm

Thermal
Max. Operating Temp.: 104 degrees F (40 degrees C) ambient
Cooling System: Heat pipe with no fan noise

Control
USITT DMX-512 1 or 2-channel DMX
4-button LCD control panel
Input: 3/5-pin XLR Male Output: 3/5-pin XLR Female
Standalone Master/Slave Mode

Weight & Dimensions
29.3 x 10.9 x 10.9 in (745 x 277 x 276 mm)
22.5 lbs ( 10.2 kg)