Your Browsing History
- Free 30-day Returns
$129.99
Ships from China.
Meet Your Seller
FiiO NEWK3 Amplifier Headphone Amps Portable High Resolution 384kHz/32bit DSD256 USB Type-C Lossless for PC/Laptop/Smartphones/Speaker Home Audio
- Equipped with an XMOS USB receiver chip, the new K3 headphone amps is capable of decoding up to 384kHz/32 bit PCM and native DSD256 the same as many DACs costing much more. The new K3's dual crystal oscillators ensure that any digital audio signals being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the new K3 to your computer via USB to instantly upgrade to high-fidelity sound, and enjoy your music.
- The new K3 headphone amplifier adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn't stop there the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2, you can go to USB Audio Class 1 mode with just the flick of a switch. In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding. · For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers. *Using the 2.0 mode requires downloading and installing the FiiO USB driver.
The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
1. Connect it to a desktop computer 2. Use the driverless 1.0 mode for business trips 3. Make it a digital turntable connected to an external decoder 4. Connect it to a speaker, using the New K3 as a DAC
Dual headphone jacks
Being optimized for indoor desktop use, the new K3 is equipped with both 3.5 mm single-ended and 2.5 mm balanced headphone jacks. Both outputs have audio jack detection, which means that when headphones are inserted into the balanced out, balanced boost automatically kicks in resulting in about a 50% output power increase compared to the single-ended out.
Line out
The 3.5 mm line out is driven directly by the OPA1612 op-amp, to ensure as little sound quality reduction as possible. The line out output is also adjustable with maximum power output up to 2Vrms, to ensure compatibility with a wide variety of active speakers and external amplifiers.
PS: When using the line out, please disconnect any headphones
Reliable USB Type-C input interface
The new K3 adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn't stop there the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
Coaxial and Optical digital outs
The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
* The volume knob does not control digital output volume. The New K3 headphone amps can output digital audio signals up to 192kHz and DSD64 over DoP. Please adjust the settings of the device you are connecting the NEW K3 to if the device does not support the digitally output format.
Different connection options for your choice
1. Connect it to a desktop computer when you at home or office.
2. Use the driverless 1.0 mode for your business trips.
3. Make it a digital turntable connected to an external decoder, you would love it.
4. Connect it to a speaker, using the New K3 amplifier as a DAC. You would know how HiFi it is.
Gain and bass switches
The switch for high and low gain ensures that you can use the new K3 with a wide variety of headphones, and that your listening volume needs are covered. The hardware bass boost switch enhances the dynamic range of the lower frequencies and gives them some extra punch to really make your songs, games, and movies come to life.
Two modes for many situations
Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2. In these situations, you can go to USB Audio Class 1 mode with just the flick of a switch.
· In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding.
· For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers.
*Using the 2.0 mode requires downloading and installing the FiiO USB driver
*After switching USB modes, you need to either turn the new K3 off and on, or unplug and plug in the USB cable.
Accessories Included
1. NEW K3*1
2. USB Type C cable*1
3. Manual*1
4. Card*1
The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
1. Connect it to a desktop computer 2. Use the driverless 1.0 mode for business trips 3. Make it a digital turntable connected to an external decoder 4. Connect it to a speaker, using the New K3 as a DAC
Dual headphone jacks
Being optimized for indoor desktop use, the new K3 is equipped with both 3.5 mm single-ended and 2.5 mm balanced headphone jacks. Both outputs have audio jack detection, which means that when headphones are inserted into the balanced out, balanced boost automatically kicks in resulting in about a 50% output power increase compared to the single-ended out.
Line out
The 3.5 mm line out is driven directly by the OPA1612 op-amp, to ensure as little sound quality reduction as possible. The line out output is also adjustable with maximum power output up to 2Vrms, to ensure compatibility with a wide variety of active speakers and external amplifiers.
PS: When using the line out, please disconnect any headphones
Reliable USB Type-C input interface
The new K3 adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn't stop there the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
Coaxial and Optical digital outs
The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
* The volume knob does not control digital output volume. The New K3 headphone amps can output digital audio signals up to 192kHz and DSD64 over DoP. Please adjust the settings of the device you are connecting the NEW K3 to if the device does not support the digitally output format.
Different connection options for your choice
1. Connect it to a desktop computer when you at home or office.
2. Use the driverless 1.0 mode for your business trips.
3. Make it a digital turntable connected to an external decoder, you would love it.
4. Connect it to a speaker, using the New K3 amplifier as a DAC. You would know how HiFi it is.
Gain and bass switches
The switch for high and low gain ensures that you can use the new K3 with a wide variety of headphones, and that your listening volume needs are covered. The hardware bass boost switch enhances the dynamic range of the lower frequencies and gives them some extra punch to really make your songs, games, and movies come to life.
Two modes for many situations
Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2. In these situations, you can go to USB Audio Class 1 mode with just the flick of a switch.
· In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding.
· For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers.
*Using the 2.0 mode requires downloading and installing the FiiO USB driver
*After switching USB modes, you need to either turn the new K3 off and on, or unplug and plug in the USB cable.
Accessories Included
1. NEW K3*1
2. USB Type C cable*1
3. Manual*1
4. Card*1
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- Read full details
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by B-IN Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...