(10m - 4Pack) Uniboot LC to LC Outdoor Armored Fiber Patch Cable, Single Mode Duplex Fiber Optic Cable Jumper Optical Patch Cord, 9/125um, (OS1/OS2 Compatible), Low Friction LSZH Black

Low Friction LC/PC-LC/PC singlemode duplex fiber optic patch cable: The OS2 fiber patch cable body is constructed with an Ultra Low Friction flame retardant LSZH jacket (Coefficient of Friction <0.2). Low Friction Cables provide an ideal solution for premises wiring. Their stiffness enables the cable to be installed by pushing as well as by the conventional pulling method. These cables can even be utilized in congested conduits. LC Uniboot Connectors - Space-saving: The LC duplex connector with uniboot consists of two LC connectors encased in a common housing with one boot, terminated on a single twin-fiber round cable. Using cable assemblies with LC Uniboot connectors saves half the space compared to traditional duplex cable. Uniboot single jacket patch cables make patch panel cable management significantly easier. Ideal for high-density cabling applications. Reversible Polarity of Uniboot Connectors - easy polarity changing: Unlike common LC patch cords, this switchable uniboot cable allows the polarity to be switched without connector re-termination. Polarity changes can be performed quickly in the field (by switching the A and B positions in the connector for each fiber), without tools, to achieve correct fiber mapping polarity. No damage to the fiber. Armored Fiber Optic Cable: This LC fiber jumper cable features a built-in stainless steel tube to protect the inner core (fiber glass) from damage. It retains all the features of a standard patch cord but is much stronger. Pressure resistant, Wear resistant, and Heat resistant. IMPORTED CORE: Uniboot fiber patch cables are manufactured with industry-leading Corning G.657.A2 optical fibres, which are fully compatible with G652D fibres but are less bend-sensitive (as low as 7.5mm radius). The G657A2 is a powerful solution for access networks where frequent bending and joining of cables and hardware miniaturization is observed. LC to LC Single mode Duplex uniboot fiber patch cords are terminated with Foxconn precision ceramic ferrule LC/PC fiber patch cable connectors, ensuring low insertion loss (less than 0.15 dB) for faster network performance. WIDELY USED: This outdoor LC LC Fiber Optic Patch Cable is compatible with all standard fibre optic equipment and connectors, commonly used in passive applications (GPON, FTTX and LANs). The LC LC SM fiber Cable is suitable for Storage Area Networks and Data Networks and connects to SFP Transceivers, Ethernet Switches and Media Converters. It is compatible with 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications