10-Pack - 1m Uniboot LC to LC Armored Fiber Patch Cable, Singlemode 9/125um Fiber Optic Cable Jumper Optical Patch Cord, Duplex, (OS1/OS2 Compatible), LSZH Black

This armored fiber optic cable is engineered for outdoor applications. The LC fiber jumper cable incorporates a built-in stainless steel tube to shield the inner fiber glass core from potential damage, such as pet chewing. It maintains all the characteristics of a standard patch cord while being substantially more robust, providing pressure resistance, wear resistance, and heat resistance. LC Uniboot Connectors - Space-saving: The LC duplex connector with uniboot design features two LC connectors housed within a common casing with a single boot, terminated on one twin-fiber round cable. Utilizing cable assemblies with these connectors can conserve half the space relative to conventional duplex cables. Uniboot single jacket patch cables greatly simplify patch panel cable management, rendering them perfect for high-density cabling setups. Reversible Polarity of Uniboot Connectors - Simple Polarity Adjustment: Unlike typical LC patch cords, this switchable uniboot cable enables polarity to be altered without connector re-termination. Polarity modifications can be performed quickly in the field by switching the A and B positions in the connector for each fiber, without requiring tools, to achieve proper fiber mapping polarity. This procedure does not harm the fiber. IMPORTED CORE: These uniboot fiber patch cables are produced with industry-leading Corning G.657.A2 optical fibers, which are fully compatible with G652D fibers but exhibit reduced bend sensitivity, featuring a bend radius as low as 7.5mm. The G657A2 fiber is an effective solution for access networks where frequent cable bending, joining, and hardware miniaturization are necessary. WIDELY USED: This outdoor LC LC fiber optic patch cable is compatible with all standard fiber optic equipment and connectors. It is frequently employed in passive applications including GPON, FTTX, and LANs. The LC LC single-mode fiber cable is suitable for Storage Area Networks and Data Networks, connecting to SFP Transceivers, Ethernet Switches, and Media Converters. It is compatible with 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm), and Asynchronous Transfer Mode (ATM) applications