100 Meters Uniboot LC to LC Outdoor Armored Fiber Patch Cable, Low Friction Single Mode Duplex Fiber Optic Cable Jumper Optical Patch Cord, 9/125um, (OS1/OS2 Compatible), LSZH Black

Low Friction LC/PC-LC/PC singlemode duplex fiber optic patch cable: The OS2 fiber patch cable body is constructed with an Ultra Low Friction flame retardant LSZH jacket (Coefficient of Friction <0.2). Low Friction Cables provide an ideal solution for wiring premises. Their stiffness enables the cable to be installed by pushing as well as by the conventional pulling method. These cables can even be utilized in congested conduits. Armored Fiber Optic Cable is suitable for outdoor use: This LC fiber jumper cable incorporates a built-in stainless steel tube to shield the inner core (fiber glass) from damage. It retains every feature of a standard patch cord while being significantly stronger. It is resistant to pressure, wear, and heat. LC Uniboot Connectors - Space-saving: The LC duplex connector with uniboot design features two LC connectors housed in a common casing with one boot, terminated on a single twin-fiber round cable. Employing cable assemblies with LC Uniboot connectors can conserve half the space compared to traditional duplex cables. Uniboot single jacket patch cables make patch panel cable management much simpler. They are perfect for high-density cabling applications. Reversible Polarity of Uniboot Connectors - Simple Polarity Changing: Unlike standard LC patch cords, this switchable uniboot cable allows polarity switching without connector re-termination. Polarity changes can be performed in the field swiftly by switching the A and B positions in the connector for each fiber, without requiring tools, to achieve correct fiber mapping polarity. There is no damage to the fiber. IMPORTED CORE: The uniboot fiber patch cables are produced with industry-leading Corning G.657.A2 optical fibers, which are fully compatible with G652D fibers but exhibit less bend sensitivity, with a bend radius as low as 7.5mm. The G657A2 is a robust solution for access networks where frequent bending, cable joining, and hardware miniaturization are required. LC to LC Single mode Duplex uniboot fiber patch cords are terminated with Foxconn precision ceramic ferrule LC/PC connectors, ensuring low insertion loss (less than 0.15 dB) for high-speed network performance. WIDELY USED: This outdoor LC LC Fiber Optic Patch Cable is compatible with all standard fibre optic equipment and connectors. It is frequently used in passive applications (GPON, FTTX, and LANs). The LC LC SM fiber Cable is suitable for Storage Area Networks and Data Networks, connecting to SFP Transceivers, Ethernet Switches, and Media Converters. It is compatible with 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm), and Asynchronous Transfer Mode (ATM) applications