10-Pack - 1m Uniboot LC to LC Armored Fiber Patch Cable, Singlemode 9/125um Fiber Optic Cable Jumper Optical Patch Cord, Duplex, (OS1/OS2 Compatible), LSZH Black

Armored Fiber Optic Cable for outdoor applications: This LC fiber jumper cable features a built-in stainless steel tube to shield the inner core (fiber glass) from damage, such as pet chewing. It maintains all the characteristics of a standard patch cord while offering superior strength. It is pressure resistant, wear resistant, and heat resistant. LC Uniboot Connectors - Space-saving design: The LC duplex connector with uniboot consists of two LC connectors housed in a common casing with one boot, terminated on a single twin-fiber round cable. Utilizing cable assemblies with LC Uniboot connectors saves half the space compared to conventional duplex cables. Uniboot single jacket patch cables make patch panel cable management significantly easier. Perfect for high-density cabling installations. Reversible Polarity of Uniboot Connectors - Simple polarity adjustment: Unlike typical LC patch cords, this switchable uniboot cable enables polarity to be switched without connector re-termination. Polarity changes can be performed swiftly in the field (by switching the A and B positions in the connector for each fiber), without tools, to achieve correct fiber mapping polarity. No damage to the fiber. IMPORTED CORE: Uniboot fiber patch cables are produced with industry-leading Corning G.657.A2 optical fibers, which are fully compatible with G652D fibers but are less bend-sensitive (with a bend radius as low as 7.5mm). The G657A2 is an effective solution for access networks where frequent bending, cable joining, and hardware miniaturization are required. WIDELY USED: This outdoor LC LC Fiber Optic Patch Cable is compatible with all standard fiber optic equipment and connectors. It is frequently used in passive applications (GPON, FTTX, and LANs). The LC LC SM fiber cable is suitable for Storage Area Networks and Data Networks. It connects to SFP Transceivers, Ethernet Switches, and Media Converters, and is compatible with 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm), and Asynchronous Transfer Mode (ATM) applications