( black plating and small contact area are both not conducive to spark making )
Scrape off the black coating on flint strips before first use.
Tips
- Re-dip the wick with lighter fluid as soon as the cotton burns in red. This will prolong the working life of the wick.
- Don't fill too full. Too much lighter fluid in the wick is another reason that fail to ignite fire.
- The exposed part of the wick should be at least half of the length of the exposed scraper, or else it may be more difficult to ignite.
- Be Careful! Never put your finger toward the scraping direction, or else the scraper may hurt your finger.
The Permanent Match - This Unique Llghter Will Amaze All Your Friends
Ever wish you had something unique that no one else had? The Permanent Match is just that. This unique lighter will amaze your friends and family. Take it with you wherever you go. When someone askes for a light you will be prepared to show them your magical new lighter!
Unscrew the rod and add lighter fluid first (no fuel included)
Screw the scraper back and wait 3 Min, let the cotton and wick fully absorb the lighter fluid.
Holding the scraper at a 45-degree angle with the flint. Push hard and slide downward to ignite.
Important: Remove black wax from new flint strips. The plating and small surface area hinder sparking.
Perfect Tools for Camping Hiking Fishing
Is fuel included?
For transportation safety, our products do not contain fuel. You need to purchase it separately.
Why won't it start?
No fuel added.
Why won't it start?
Too much fuel added, completely soaking the cotton wick. You can wait for the wick to dry out a bit before trying again.
Why won't it start?
The black sealing wax on the surface hasn't been scraped off. You can scrape it a few more times.
( black plating and small contact area are both not conducive to spark making )
Scrape off the black coating on flint strips before first use.
Tips
- Re-dip the wick with lighter fluid as soon as the cotton burns in red. This will prolong the working life of the wick.
- Don't fill too full. Too much lighter fluid in the wick is another reason that fail to ignite fire.
- The exposed part of the wick should be at least half of the length of the exposed scraper, or else it may be more difficult to ignite.
- Be Careful! Never put your finger toward the scraping direction, or else the scraper may hurt your finger.
The Permanent Match - This Unique Llghter Will Amaze All Your Friends
Ever wish you had something unique that no one else had? The Permanent Match is just that. This unique lighter will amaze your friends and family. Take it with you wherever you go. When someone askes for a light you will be prepared to show them your magical new lighter!
Unscrew the rod and add lighter fluid first (no fuel included)
Screw the scraper back and wait 3 Min, let the cotton and wick fully absorb the lighter fluid.
Holding the scraper at a 45-degree angle with the flint. Push hard and slide downward to ignite.
Important: Remove black wax from new flint strips. The plating and small surface area hinder sparking.
Perfect Tools for Camping Hiking Fishing
Is fuel included?
For transportation safety, our products do not contain fuel. You need to purchase it separately.
Why won't it start?
No fuel added.
Why won't it start?
Too much fuel added, completely soaking the cotton wick. You can wait for the wick to dry out a bit before trying again.
Why won't it start?
The black sealing wax on the surface hasn't been scraped off. You can scrape it a few more times.