This dual-bay nvme duplicator docking enables 10Gbps super speed data transfer, with 992Mb/s write/read speeds for most NVME SSDs. It took about 4 minutes to clone a 256GB m.2 SSD to a 2TB one as tested.
Compatible with: M.2 NVMe PCI-e SSD (22110/2280/2260/2242/2230mm).
Support Dual-bay SSDs simultaneously, data transfer speed 10Gbps.
Output: USB 3.2/3.1 Type-C Port.
Meterial: Aluminum Alloy.
Only support NVMe SSD!
Easliy to clone the older SSD with data or system to new and larger one, without Computer.
B=source SSD; A= Target SSD, and please make sure the capacity of Disk B is equal or less than Disk A.
Support 2x M.2 NVMe SSDs connect to Computer at same time, as external SSD enclosure, read and write.
1x Dual NVMe SSD Dock.
1x USB-C Cable with C-A Adapter.
1x DC 5V Adapter.
1x User's Manual.
[Offline Clone Function]
RIITOP NVMe Offline Cloner is easily operated.
Step:
1.Connect the DC Power Adapter after Source SSD (into Right Slot) and Target SSD ( into Left Slot) Inserted (Source SSD capacity less than Target) .
2. Press "Clone" Button for about 3-5 seconds till all of the "Percent Progress Indicators" flash simultaneously, release the Botton.
3. Then re-click the Botton again, the percent process indicators flash sequentially, Clone will start.
4. after all four progress indicators on, Clone is completed.