Product Information:
- Single disk support up to 16TB.
- Support Windows, MAC, Linux Systems.
- Providing 12V 6.5A external power supply to ensure stable running.
- PUSH design allows you to replace the hard drive more conveniently.
- USB3.0 to SATA 3.0 6Gbps transfer speed, backwards compatible with USB2.0/1.1.
- Spare trays are sold separately in a set of six trays, extra screws are provided, Get it at ASIN: B083S8VDQK.
- More FAQs, please download the Troubleshooting Guide (PDF) at Product Guides and Documents below.
IMPORTANT NOTE:
1. The device needs to be connected directly to your computer. WHY?--If you use a usb hub, the device is likely to be disconnected frequently due to insufficient power supply or even unrecognized by the computer.
2. Be sure to pay attention to the difference is the screw types (wider threads secure drive to sled; tighter threads secure sled to enclosure),Make sure you have the right ones for your drives before starting.
Please refer to the picture attached to insert the plug as the indicated direction, or the enclosure won't work properly if the plug is inserted in a wrong direction.
Make sure that the flat end of the power connector is facing up.
No need to buy different hdd cases for different sizes of hard drive.
2.5" hard drive: fixed with 4 screws at the bottom.
3.5" hard drive: fixed with 2 screws on both sides.
Spare trays are sold separately in a set of six trays, extra screws are provided
Keep your HDD/SSD in normal temperature.
- Cool all-aluminum enclosure.
- Air convection cooling duct design.
- Front and rear with large area cooling holes.
- 80 mm silent fan speed up convection and rapid cooling.
Four indicator lights monitor the status of each disk.
- Blue light: Power on
- Blue light flashing: Reading data
- Red light: Hard drive error
Troubleshooting Guide
Q: How do i know if one of the hard drive is failed?
If one of the drives is damaged/failed, the corresponding indicator will turn red and the enclosure will make a warning sound(beep).
Q: How to Replace A Hard Drive?
If you want to replace one of the drives in the enclosure with a new one, or one of the drives is damaged/failed, please take following steps:
1. Find the drive(bad one or the one you wanna replace). Eject the enclosure from the computer and then power off the enclosure.
2. Pull out the drive. Format the new drive on another device first. Then insert the new drive to the original position and turn on the enclosure.
Q: How to add a new hard drive into the enclosure?
1. Safely eject the enclosure from your computer and then turn off the enclosure.
2. If the drive you want to add is a brand new drive, please format it on another device. Then insert it into the enclosure. Do not change the drive order.
Q: Can I connect the device to the computer through a hub?
We recommend that you connect the device directly to the computer, as the connection may be unstable through a hub.
Q: What are the specification of the fan?
The diameter is 80mm, the voltage is 12V, and there is no current limit. 2 PIN.