Your Browsing History
- Free 30-day Returns
$158.24
Meet Your Seller
POE2000 PoE Tester Pro Inline Power Over Ethernet Detector - PSE-Type/Class, Power Source, Polarity, Voltage, and Current
- Four LEDs indicate IEEE802. 3af or 802. 3at/bt standard
- Dual 7-digit LEDs indicate power source either End Span (1/2, 3/6) or Mid Span (4/5, 7/8) or across all four pairs
- Determines standard PoE or non-standard passive PoE
+
+
Overview
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Two yellow LEDs indicate reversed polarity for power type
When used inline, the display alternates between Voltage, Current and Power with a step button for selecting specific data to display
The POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. There is a test mode that can determine if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used.
For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, the POE2000 uses system power when connected to a device.
When used inline, the display alternates between Voltage, Current and Power with a step button for selecting specific data to display
The POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. There is a test mode that can determine if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used.
For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, the POE2000 uses system power when connected to a device.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Halo Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...