Seastar Q1S, Quick Release Plate, Quick Setup Kit with 1/4" 3/8" Screw,Compatible with SLR, Video Camera, Ball Head, Tripod, Monopod

Small and portable: It is designed in a pocket size, weighs only 0.5 pounds but the maximum vertical load is up to 19.8 pounds. Available for most of photographic equipments.
Different combinations Depending on your real needs, you buy different quantities of top and bottom panels. The top plate can be installed on the plate, tripod, monopod, slide track and other photographic equipment; the base plate can be installed on the camera, fluid head, rocker arm, photo lamp and other flat photo equipment.
Warm Tips: When installing the quick release base, please ensure that it is in the locked position and tighten the 2 fixing screws on the base with included 2.5 mm#hex wrench to avoid loosening when moving the camera equipment.


Seastars Q1s Quick Release Plate for
Tripod & Monopod HeadFeatures: This quick release base can be attached to tripod heads and fluid heads, to achieve connectivity-quickly and easily switch your camera to a variety of camera support equipment. Fitting compatible with tripod head and all other camera and accessory brands. How to mount the quick release plate?
1. Turn the base clockwise to install on tripod or monopod.
2. Turn clockwise to attach a camera head or camera head onto the base.
NOTE:
Hold the head or camera to prevent it from falling accidentally when you release it. How to use the quick release plate?
1. Gently turn clockwise until a click is heard, indicating that the quick release head has now release.
2. Gently insert the quick release head into the quick release base, push down and rotate either direction until click sound indicates that it is now locked in position.
NOTE:
The quick release head can only be inserted only when the quick release base is in the unlocked position.