1set Fuel Sending Unit and Gauge Kit 180mm Length Boat Fuel Sending Unit Marine Fuel Sender Unit Black Silver Tone Metal 240-33 Ohm

Installation Steps: To ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.
Attribute: The Fuel/Water Level Sensor with standard output of 240-33 Ohm.





Compatibility:

The Marine sending unit is suitable for cars and ships, trucks, buses, boats, etc.

Functionality:

Output Signal: 240-33 Ohm
Materials: Metal
Length: 180mm / 7.09"

Advantage:

A durable fuel water-sending unit is intended for a long service life.
The fuel sensor is easy to install and use, fix the sensor, then connect the wiring and it will start working.
Fuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generators/generator sets, and marine field.

Material:

Applying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.

Installation Steps:

How to use fuel gas sender:

1. Just connect a ground blue wire from the marine fuel sending unit to a common grounding hook-up. The blue wire connects to the negative pole of the power supply.

2. And connect the signal red wire from the fuel level sending unit to the gauge hook-up.

Package Content:

1 Set Fuel Sending Unit and Gauge

Kindly Know:

Please allow 1-2mm error due to manual measurement.