Your Browsing History
Meet Your Seller
2-in-1 Dual Probe Moisture Meter 40mm Spherical Moisture Reader & ±2.5% Accuracy Pin Moisture Meter with LCD Display and Audio Alarm for Wood Wall Concrete Drywall Firewood Lumber
- High-Accuracy Dual-Probe Design: moisture meter combines a spherical pinless sensor and pin probe. Pinless mode enables non-destructive scanning of walls/floors/ceilings (40mm depth), using relative readings to rapidly compare and locate moisture concentration. Pin mode delivers high-precision (±2.5%) actual moisture measurement for wood (0-52%) and building materials (0-30%). Ideal for spot-checking lumber or structural elements
- Custom Thresholds & Pre-Set Ranges: Customize your pinless moisture meter's MOIST/WET alerts using suggested thresholds: Plaster/Anhydrite (DRY<30, MOIST 30-60, WET>60), Cement Materials (DRY<25, MOIST 25-50, WET>50), or Wood (DRY<50, MOIST 50-80, WET>80). For direct measurements, pin mode features fixed WOOD Mode alerts: DRY 5-11.9%, MOIST 12-19.9%, WET 20-52%; BLD Mode: DRY 2-7.9%, MOIST 8-11.9%, WET 12-30%
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Instant Visual & Audible Alerts: moisture reader delivers clear warnings through color-coded
LED: Green (DRY), Blue (MOIST), Red (WET) -paired with distinct audible alerts: Beep for MOIST conditions, rapid continuous beeping for WET levels. A dynamic bar graph visually tracks moisture progression while the mute function silences alarms when needed, retaining LED warnings for discreet inspections in sensitive environments
Rechargeable with Utility Function: Moisture reader powered by a 1200mAh battery with USB-C charging for continuous operation. Auto power-off conserves energy after 30 minutes of inactivity. The HOLD function locks readings in vibrating environments, while the backlit LCD ensures clear visibility in dark spaces like attics or crawlspaces
NOTE (Pinless Measurement): a. Must calibrate in air (>10cm from objects) when switching to Scan Mode, or readings are invalid. b. Press probe vertically flush against the surface. Avoid tilting, edges, or materials <5mm thick (may cause high/no readings). c. Avoid metal (nails/wires), salt, static, rough surfaces, or debris clean measurement points for accuracy. d. Shows relative values only compare multiple points to map moisture distribution. e.Cannot measure free water/surface film or display absolute moisture content
NOTE (Pin Probe Measurement): a. Insert pins fully into wood/building materials at consistent depth. b. Measure wood across the grain (not parallel to rings) to avoid skewed readings from uneven insertion. c. Keep 5cm from edges to prevent false moisture detection. d. Accuracy may decrease on wood below -5°C
LED: Green (DRY), Blue (MOIST), Red (WET) -paired with distinct audible alerts: Beep for MOIST conditions, rapid continuous beeping for WET levels. A dynamic bar graph visually tracks moisture progression while the mute function silences alarms when needed, retaining LED warnings for discreet inspections in sensitive environments
Rechargeable with Utility Function: Moisture reader powered by a 1200mAh battery with USB-C charging for continuous operation. Auto power-off conserves energy after 30 minutes of inactivity. The HOLD function locks readings in vibrating environments, while the backlit LCD ensures clear visibility in dark spaces like attics or crawlspaces
NOTE (Pinless Measurement): a. Must calibrate in air (>10cm from objects) when switching to Scan Mode, or readings are invalid. b. Press probe vertically flush against the surface. Avoid tilting, edges, or materials <5mm thick (may cause high/no readings). c. Avoid metal (nails/wires), salt, static, rough surfaces, or debris clean measurement points for accuracy. d. Shows relative values only compare multiple points to map moisture distribution. e.Cannot measure free water/surface film or display absolute moisture content
NOTE (Pin Probe Measurement): a. Insert pins fully into wood/building materials at consistent depth. b. Measure wood across the grain (not parallel to rings) to avoid skewed readings from uneven insertion. c. Keep 5cm from edges to prevent false moisture detection. d. Accuracy may decrease on wood below -5°C
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Group Can Trading Limited Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...