Digital Electronic Display Micrometer 0-1" / 0-25mm Gauge 0.00005" / 0.001mm Thickness Measuring Tools for Mechanics Inch/Metric Calipers, Machinist Micrometer, Protective Case with Battery

3V button
Battery: CR2032 lithium battery, high capacity, durable and safe
mm / inch conversion / zero position at each position / incremental or absolute measurements.
Metric and inch conversion operation: long press the button for 2-3 seconds to switch

As professional mechanic tools, the digital outside micrometer is used to measure the outer diameter, outer diameter, length, thickness and other data of various objects (such as cylinders, coins, cloth, glass, leather, paper, etc. ), and can also be used to measure the data needed for welding.
Large LCD display, clear screen,
Carbide mental probe, durable
The micrometer with ratchet thimble
It can measure both relative and relative measurements.
Automatic turn off in 5 minutes
Battery: Lithium battery CR2032 (obtained) lasts more than 2000 hours
Instructions:
ON \ OFF...
SET: ONOFF and set button. Press the button briefly, switch the device on and off, press this button for a long time and set the zero to " 0.25, 50, 75". "Hold down the button to alternately display several zero values Key when one of the zero values is displayed The zero value is the currently displayed value.
ZERO: Zero button. Press the button. The data will be used as default starting value ( 0.25, 50, 75).
ABS... in / mm: Relative and absolute scale conversion key, metric and inch conversion key. Press this button briefly to perform the absolute measurement and the relative dimension conversion "In" and small font "5", it will be displayed in inches.
Operating temperature: 0-40 ° C
Humidity in operation: 80%
1Please note the sharp edge to avoid a wound.
2Please wipe the probe clean before use to make sure there is no dirt, otherwise it will affect the accuracy
1 x Digital Electronic Micrometer (with a CR2032 battery)
1 x user manual
1 x storage box