[Battery Saver and
Protection Technology]: Auto sleep and wake up mode, over-voltage, over-current, over-temperature and battery drain protection allow FD+ to be left plugged in without damaging the car and battery. Operating Current is 51mA, automatic sleep in idle state, sleep current is as low as 3mA.
[Powerful,
Faster and Smoother]: USART data buffer up to 2K bytes, baud rate increased to 230.4K bps. OBD request byte up to 1024 bytes, can meet the needs of some special long frame communication. TP transmission protocol, Ensure wireless communication security. Up to 3 ways to wake up from sleep mode.
[Wide Compatibility]: Support HS-CAN/MS-CAN protocols - can access these proprietary For-d car networks in addition to the 5 standard OBD-II protocols. Fully compatible with ELM's AT command set (ELM327, ELM329) and STN's ST command set. Works with all 1996 and newer 12V petrol cars compatible with standard OBD2 protocols, and all 1996 and newer 12V small diesel vehicles with a load of 6.5T or less supporting the OBD2 protocols. Don't use on a 24V power diesel car.
[Support Third-party Apps (NOT included, some Apps or advanced featrures may require separate purchase)]: TORQUE Lite/Pro, JScan, OBD Fusion, DashCommand, Car Scanner ELM OBD2, BimmerCode, BimmerLink, inCarDoc, AlfaOBD, etc. Made for FORScan, recommended by FORScan Team.