Your Browsing History
Meet Your Seller
Obd2 Breakout Box, Automotive OBDII Protocol Detector 16-Pin CAN Diagnostic Tool for Communication/Power/Ground Detection with Universal Wire Jumper and Clips
- Core Functions The OBD Breakout Box can directly connect to the vehicle's on-board data link for easy access to the data bus. It supports communication between OBD2 scanners and vehicles, enabling routine diagnostic operations such as fault code reading and data stream analysis. It can also power the on-board computer and test OBD interface voltage to meet basic detection needs of the vehicle's electrical system.
- Supporting Equipment The input jacks of the OBD Breakout Box strictly replicate the 16-pin standard configuration of the OBDII interface. It has built-in input jacks compatible with 4mm banana plugs, and is equipped with a 17.7-inch OBDII extension cable. The 5-foot battery alligator clip cable adopts a standard DC2.1*5.5mm interface.
+
+
Overview
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Powerful Additional Functions. By connecting to devices such as multimeters and oscilloscopes, it can conduct in-depth monitoring of the signals of each pin of the OBDII interface.. When replacing the vehicle battery, connecting an additional 12V 2A power supply via the breakout box can provide continuous power to the vehicle's ECU, preventing loss of on-board data and automatic locking of the vehicle's electrical equipment.. It supports simultaneous connection of multiple diagnostic devices (e. g., OBD2 diagnostic tools, car recorders, navigation devices).
Important Warnings Do not connect jumpers between the power pin (Pin 16) and ground pins (Pin 4, Pin 5)! Do not use this tool to power load devices with power exceeding 1 ampere! Do not connect any pins with jumpers without understanding the circuit structure!
3-Year After-Sales Service promises free replacement of parts within 3 years. If you encounter any technical problems while using this product, please feel free to contact us for solutions.
The Automotive OBD2 Protocol Detector & Breakout Box is a dedicated straight-through circuit tester for OBD2 data. Connect it to your vehicles OBD2 system to easily and safely test communication protocols, power supply and ground circuits.
The breakout box features male and female connectors, allowing easy insertion between your diagnostic tool and the vehicle. This setup facilitates CAN bus signal measurements. The OBD2 breakout box cable length is 45 cm ( 17.7 inches).
The 16-pin OBD2 breakout box comes with a built-in input jack compatible with all 4mm banana plugs, allowing easy connection to a multimeter or oscilloscope for advanced measurements.
Important Note: Read manual carefully before use. If unsure of vehicle circuits, do not short-circuit input jacks with a jumper. For pros only. Improper use may damage vehicle systems.
2-The decoder conducts communication measurement on the vehicle
4-Check whether the body grounding is normal 5-Check whether the signal grounding is normal
6 & 7 & 10 & 14 & 15-The decoder conducts communication measurement on the vehicle
16-Check whether the carcircuitis normal
Important Warnings Do not connect jumpers between the power pin (Pin 16) and ground pins (Pin 4, Pin 5)! Do not use this tool to power load devices with power exceeding 1 ampere! Do not connect any pins with jumpers without understanding the circuit structure!
3-Year After-Sales Service promises free replacement of parts within 3 years. If you encounter any technical problems while using this product, please feel free to contact us for solutions.
The Automotive OBD2 Protocol Detector & Breakout Box is a dedicated straight-through circuit tester for OBD2 data. Connect it to your vehicles OBD2 system to easily and safely test communication protocols, power supply and ground circuits.
The breakout box features male and female connectors, allowing easy insertion between your diagnostic tool and the vehicle. This setup facilitates CAN bus signal measurements. The OBD2 breakout box cable length is 45 cm ( 17.7 inches).
The 16-pin OBD2 breakout box comes with a built-in input jack compatible with all 4mm banana plugs, allowing easy connection to a multimeter or oscilloscope for advanced measurements.
Important Note: Read manual carefully before use. If unsure of vehicle circuits, do not short-circuit input jacks with a jumper. For pros only. Improper use may damage vehicle systems.
2-The decoder conducts communication measurement on the vehicle
4-Check whether the body grounding is normal 5-Check whether the signal grounding is normal
6 & 7 & 10 & 14 & 15-The decoder conducts communication measurement on the vehicle
16-Check whether the carcircuitis normal
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Grandwood Tech Limited Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...