PowMr 60A MPPT Solar Controller, 60amp Battery Charge Controller for 12V/24V/36V/48V Lithium LiFePO4 and Lead-Acid Batteries, 2-60A Adjustable Current, Support 12 in Parallel

Dual Cooling, Efficient Heat DissipationThe 60amp mppt charge controller is constructed with die-cast aluminum, ensuring excellent heat dissipation and reduced power consumption. Additionally, it features a turbofan fan for efficient cooling (activates at temperatures >45°C and turns off <40°C). The upgraded turbofan fan cooling system is quieter and more effective, making it suitable for use in RVs, commercial vehicles, boats, yachts, and solar systems, and equipped with an external temperature probe configuration
Compatible with Multiple Type BatteriesNegative grounding design solar controller safer, 60a charge controller compatible with a variety of 12/24/36/48V batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LiFePO4 and Lithium-Ion) battery charging parameter pre-set, other battery can be customized charging parameter according to your need. User-programmable Absorption Voltage / Float Voltage / Low Voltage Cutoff / Load Timer
Enhanced Protection and Lithium Battery CompatibilityThe 60A solar controller provides comprehensive protection against various faults, including overcurrent, short circuit, reversed polarity, overvoltage, over-discharge, and over-temperature. It enhances precision in battery temperature monitoring through an external temperature probe configuration. The system is compatible with lithium batteries and adjusts charging cycles accordingly. It also activates lithium batteries with solar panel energy, with precautions to prevent overcharging, but please note that Do not charge lithium batteries when the temperature is below 0°C
99% Tracking TechnologyMPPT 60A Solar Controller with advanced Maximum Power Point Tracking technology can continuously track the arrays maximum power point to get the maximum power to charge the battery. The tracking efficiency is not less than 99% and the peak conversion efficiency is up to 97%
Please note that the PV input must be disconnected before setting parameters. If the solar controller displays night mode, please perform a reset using the following method: With only the battery connected to the controller, press and hold the last button for more than 5 seconds to restore the solar controller to factory settings.