PCIe 10 Ports SATA 3.0 Controller Card with 10 SATA Cables 6Gbps Expansion Card Compatible with Win 8/10/Ubuntu

10
PORTS SATA CARD: With the 10 ports SATA PCIe card, you can add 10 SATA III 6Gb/s drives for your desktop; and Dell computers block the BIOS interface of any third party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read
SPECIFICATION: Compliant with PCI Express v 2.0 specification and backward compatible with PCI Express v 1.0. If higher speed is required, the motherboard must be PCIe 2.0 or higher; Insert a 10 ports SATA PCIe card into the x16 slot; The actual speed depends on the PCIe bandwidth of the motherboard; If all ports are used at the same time, the speed will slow down


System Requirements:
Applicable Slots: PCI
Express X1, can be used on PCIe slots X4 / X8 / X16
System: Support for Windows 8/10 32/64 bit / MAC 10.14 / NAS / Linux
Not recommended for use with Win 7, may be blocked
-Multiple hard drives require sufficient power to prevent "drop channels" "not working" and so on
-Using multiple operating systems supports only Windows
-You must turn off the power before connecting the SATA PCIe card to the motherboard or remove it
-The PCIe X1 10 port SATA 3.0 PCIe controller card provides a simple connection between a host computer and SATA 3.0 devices (SATA hard drive or SATA device), enabling 10 SATA devices at speeds up to 6 Gbps
Product Features:
Chipset: Asmedia ASM1166 and JMB5XX
Supports 10 SATA 3.0 6 Gbps devices
Complies with PCI
Express v 2.0, v 3.0 specification, backward compatible with PCIe 1.0; Complies with Serial ATA 3.0 specification, backward compatible with Serial ATA 2.0, Serial ATA 1.0
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
Supports FIS based port multiplier and Plug and play command based switching, supports Hot Plug and Hot Swap
Package Contents:
10 x SATA cables
1 x PCIe X1 to 10 SATA 3.0 controller card
1 x Low profile bracket
1 x SATA splitter adapter cables