Mic Stand Floor Boom Arm with 6.6lbs Weighted Base for Blue Yeti, Nano, Snowball, HyperX QuadCast, SM7B MV7, Fifine K688 and More Mic, Floor Microphone Stand with 3/8" to 5/8" 1/4" Screw, Pop Filter

Double Pop Filter 360° angle rotatable through adjustment knobs which allows for easy positioning. Double screen pop filter effectively blocks air blasts and banishes the dreaded hissing and lisping sounds to achieve perfect sound quality.
Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1x metal base, 3x support rods, 1x folding arm, 1x mic clip, 1x pop filter, 2x metal screws(3/8" to 5/8" and 3/8" to1/4"), 5x cable ties and 1x Product Manual. The microphone arm can be folded for easy carrying and storage.


Microphone floor stand with scissors boom arm
Stable Flat Base
The base weighs 6.6 pounds, it is more stable and has greater load-bearing capacity. The thickness of the base is 0.32 inch, saving space. Compared to tripods, the flat base avoids the issue of the tripod being tripped by feet.
Adjustable Folding Arm
The stand arm can be extended 135° front and back and 180° up and down. The position of the 3/8" connector can be adjusted up and down 270° and rotated 360°, and the MIC can be adjusted to face any direction.
Overhead Mic Stand
The height of the pole is 105cm ( 41.3 inch), which is 31cm ( 12.3 inch) higher than a 74cm/29inch table. When the mic is not in use, the stand arm can be easily pushed above the head. Just pull down slightly when using mic.
Compatible for 5/8" interface MIC
For Blue Yeti, Blue Yeti Pro, Blue Yeti X, Blue Snowball, HyperX QuadCast, HyperX QuadCast S, HyperX SoloCast, SM7B, MV7, Fifine K688 AM8, Razer Seiren mini, Razer Seiren X and more.
Compatible for 1/4" interface MIC
For Blue Yeti Nano, Elgato Wave 3, Elgato Wave 1 and more.
Upgraded Clip for Diameter 1.26" to 2.28" MIC
For SAMSON Q2U, AT2020, AT2035, AT2040, NW-700, NW-800, Fifine K669B, MPM-1000 and more.