Fog Machine Halloween, Smoke Machine 1200W and 6000CFM with Wireless Remote Control and 6 Colorful LED Lights for Outdoor Indoor Christmas Wedding Stage Effect DJ (1200W 1Pack)

Simple Operation: Simply set up the fog oil and use a simple remote control. And this smoke machine indoor has a Large 1-liter cylinder! Frequent refueling is not required. Equipped with a suspension bracket, easy to install and use.
Widely UsedThe fog smoke machine is widely used in entertainment venues to enhance lighting effects, such as dj party, concerts, nightclubs, weddings, birthday, Halloween, Christmas.

1 12 Colors Light Effects
2 Remote Control
3 Spray Fog Downwards
4 Spray Fog Upwards
1 Suitable Situations 2 Christmas 3 DJ Stage 4 Wedding 5 Halloween Party
1 Parameters 2 Product Detail 3 Packing List
Common issues that can often be resolved with some simple troubleshooting steps
1.
Clean the heater block: - Mix equal parts distilled water and white vinegar; - Run this solution through the machine for 2-3 minutes; - Follow with clean fog fluid for 2-3 minutes

2.
Check for clogs: - Make sure the fluid line isn't pinched or blocked; - Verify the fluid tank cap is allowing proper air flow; - Ensure the fluid pickup tube is properly seated in the tank;

3.
Prime the pump: - Disconnect and reconnect the fluid line; - Hold down the fog button for 30-45 seconds; - You may need to repeat this a few times
Important: Always use quality fog fluid and never run the machine dry, as this can damage the heating element.
More advanced solutions If these steps don't resolve the issue, here are more advanced solutions to try:

4.
Deep Cleaning Process: - Unplug the machine and let it cool completely; - Remove the nozzle (if possible) and soak it in 99% isopropyl alcohol for 30 minutes; - Use a small brush to gently clean the nozzle opening; - Dry thoroughly before reinstalling;

5.
Check Electrical Component: - Verify the heating indicator light is working; - Listen for the pump sound when activated; - Feel if the machine is getting warm (while plugged in); - Check if the fuse needs replacement (if applicable);

6.
Test Pump Function: - Remove fluid bottle; - Gently blow air through the fluid line to check for blockages; - Listen for unusual pump sounds (grinding, clicking, or silence); - Check if fluid is returning to the tank via return line;

7.
Reset Procedure: - Unplug the machine for 30 minutes; - Plug in and heat up without fluid for 5 minutes; - Connect fluid line and try again
Consider a replacement unit If none of these steps resolve the issue, you may need professional repair service or consider a replacement unit.