Fuel Injector Tester Kit, Automotive GDI Injector Tester 12V Vehicle Fuel Injector Adapter Cleaner with LCD Display for Car Gasoline Tseter and Cleaning

Vehicle injector cleaner can display the working mode, working pulse width and working frequency of injectors, so you can set different frequency and pulse width to simulate various working conditions of engines, easy to set.
Finally: We will provide you with 1 injector tester, 1 injector cleaning adapter, 1 conversion cable and 1 English instruction manual. And there is a 12-month warranty. If you are not satisfied with our products, or have any quality problems. Please contact us first, and we will solve your problem as soon as possible.

GDI Gasoline Injector Tester <
The main function of this 12V Fuel Injector Tester Tool is to test normal self-priming injectors and cylinder direct injection (GDI EM) to help identify stuck, leaking or burned out conditions. ( Please note that this tool can only be powered by the vehicle's 12V battery. )
The tester has two buttons and a knob for adjusting values and modes, and the kit includes 2 injector adapters and an injector conversion cable for a variety of injectors with different plugs. All you need is a bottle of carburetor cleaner and you are ready to do a simple injector test.
Outline of K205S
1: LCD Screen,
2: Gasoline led indicator
3: Select key, Used to select the current menu
4: Start/Stop key, (long press for return)
5: Main Cable
6: GDI led Indicator
7: Knob: Used to resize numbers
Notice
The injector cleaning kit can be used with any fuel pressure tester. Only for gasoline engines, not for diesel engines.
Product parameters
Screen: 128*64 LCD display.
Input voltage: DC12V
Operating current: typical value: <1A.
Typical power consumption: <12W.
Pulse frequency: 1-50 Hz
Pulse width: 1~50ms.
Operating temperature: 0-50 °C.
Storage temperature: -20, -70.

1. Connect kw1025 to battery or other Power Supply (DC 12V)

2. Set the Parameter of K205S you can set any wrork mode)
3. Connect the adapter of injector

4. Connect the wire of injector
5. Press the adapter on the carburetor cleaner
6. Press the start button, and watch the spray of injector and switch different work mod.
It has 5 preset operating conditions: VL, VE, TL, HL, ML, and you can set the parameters according to your needs. T
This K205S o f ours comes with an LCD screen that shows the operating mode, operating pulse width and operating frequency of the injector, so you can simulate various operating conditions of the engine by setting different frequencies and pulse widths.