Your Browsing History
- Free 30-day Returns
$97.99
Meet Your Seller
3/8" NPT Compressed Air Filter Regulator Lubricator Combo, Water/Oil Trap Separator, Gauge (0-150 psi), Semi-Auto Drain, Poly Bowl & Bracket, 3-in-1 Two Unit (3/8" NPT)
- Product Name3/8" NPT Air Filter Pressure Regulator Lubricator Unit Combo Piggyback - Clean & Dry Compressed Air, Regulate Air Pressure Precisely, Lubricate Air Effectively.
- FeaturesTo lower or maintain air pressure; Filter moisture and fine particles from the air. 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
- SizeAir Filter Pressure Regulator thread Size:3/8" NPTOperating Pressure0-145PSI0.15-0.85Mpa
+
+
Overview
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Working Temperature32140°FFlow Rate70 SCFM (2000 L /Minute)@ 90 PSI
Product PackagingIncludes semi-Auto Drain & Polycarbonate Bowl, 0-150 Gauge & Bracketa pair of Air Coupler Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape
Attention to Detail
Pressure Regulation
Pull up the pressure gauge knob and turn:
If you turn clockwise, the pressure will rise steadily. As you turn counterclockwise, the pressure drops.
Stop turning and lock the knob when you reach the desired index, forget this step and you may run into leak problems.
Oil Quantity Adjustment
Turn the needle valve in the "+" direction to increase the suction speed, and in the "-" direction to slow down or stop.
Prepare
All calibrated components should meet the maximum flow requirements.
Please clean the interfaces and joints before installation to effectively avoid bringing dust into the gas path.
Note that the airflow direction and arrows on the product body are pointing correctly, and that the port and thread sizes match.
Dial to read
Make sure that the pressure gauge is tightly mounted on the main body, and pay attention to whether the reading rises and falls smoothly when adjusting the pressure.
Drainage
The drainage column is automatically discharged without pressure, and the air flow is closed when passing through. When the water level exceeds the upper limit, it must be drained, otherwise it will lead to poor dehumidification.
Refueling
Turn the oil filling screw clockwise and add no more than 80% of the drum. After refueling, tighten the refueling screw.
The Story Of Right Pneumatic
Pneumatic was established in
2003.
The company's main products are: air source processing components, actuators, cylinders, solenoid valves, etc. Our company is constantly improving and improving, with advanced product design, simple structure, beautiful appearance and long service life.
Based on product quality and integrity, we provides users with high-quality products.
3/8'' Air Filter Regulator Lubricator Combo 3 in 1
Product Description
Air inlet size: 3/8 NPT
Flow: 2000L/minutes
Max working pressure: 145PSI( 10.3BAR )
Operating Temperature Range: 40-140F(5-60)
Drain type: Manual
Body material: Aluminum Alloy
1 x 3 in 1 3/8'' Air Filter Regulator Lubricator Combo
1 x Pressure gauge
1 × Teflon Tape
2 × 3/8" OD× 3/8" NPT Male push to connect fittings
Product PackagingIncludes semi-Auto Drain & Polycarbonate Bowl, 0-150 Gauge & Bracketa pair of Air Coupler Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape
Attention to Detail
Pressure Regulation
Pull up the pressure gauge knob and turn:
If you turn clockwise, the pressure will rise steadily. As you turn counterclockwise, the pressure drops.
Stop turning and lock the knob when you reach the desired index, forget this step and you may run into leak problems.
Oil Quantity Adjustment
Turn the needle valve in the "+" direction to increase the suction speed, and in the "-" direction to slow down or stop.
Prepare
All calibrated components should meet the maximum flow requirements.
Please clean the interfaces and joints before installation to effectively avoid bringing dust into the gas path.
Note that the airflow direction and arrows on the product body are pointing correctly, and that the port and thread sizes match.
Dial to read
Make sure that the pressure gauge is tightly mounted on the main body, and pay attention to whether the reading rises and falls smoothly when adjusting the pressure.
Drainage
The drainage column is automatically discharged without pressure, and the air flow is closed when passing through. When the water level exceeds the upper limit, it must be drained, otherwise it will lead to poor dehumidification.
Refueling
Turn the oil filling screw clockwise and add no more than 80% of the drum. After refueling, tighten the refueling screw.
The Story Of Right Pneumatic
Pneumatic was established in
2003.
The company's main products are: air source processing components, actuators, cylinders, solenoid valves, etc. Our company is constantly improving and improving, with advanced product design, simple structure, beautiful appearance and long service life.
Based on product quality and integrity, we provides users with high-quality products.
3/8'' Air Filter Regulator Lubricator Combo 3 in 1
Product Description
Air inlet size: 3/8 NPT
Flow: 2000L/minutes
Max working pressure: 145PSI( 10.3BAR )
Operating Temperature Range: 40-140F(5-60)
Drain type: Manual
Body material: Aluminum Alloy
1 x 3 in 1 3/8'' Air Filter Regulator Lubricator Combo
1 x Pressure gauge
1 × Teflon Tape
2 × 3/8" OD× 3/8" NPT Male push to connect fittings
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Grandwood Tech Limited Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















