12V/24V Fans Controller Switch #0444, Temperature Range 104F to 230F

Smart Dual Fan Management: The adjustable fan controller set can operate 1-2 fans; the second fan starts with a 10-second delay after the first fan activates, avoiding circuit overload. It also works with the air conditioning system, greatly improving cooling efficiency and saving energy.
Circuit Type: Pre-programmed micro controller
Easy Installation: Equipped with clear installation instructions and color-coded wires (red/B+, black/B-, yellow/ignition+), it enables quick installation even in tight engine compartments. Extended 3m sensor cable, and all wires use oversized diameters to ensure current-carrying capacity. The harness has built-in A/C override or manual toggle switch wires for flexible operation
Durable Quality: Digital radiator fan switch kit is made of high standard material, wear resistant and durable. Professional craftsmanship ensures long-term stable performance, its size 3.75" x 2.6" x 2.2" compatible with OE# 0444/DC0444/DC-0444
High Performance

Specifications

: Max voltage of 15V with max current capacity of 50A, featuring dual relay setup for reliable operation. Single speed configuration with 10-second delay to start up the second fan, ensuring optimal performance for both single and dual fan applications
AIR TEMPRETURE APPLICATION
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
WATER / COOLANT APPLICATION
The 0444 sensor can also be placed directly into the coolant system and no need to cut hoses. You will need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment. It is recommended to install the sensor in the return hose from the radiator.
SPECIFICATION
Relay setup: Dual relay
Sensor Wire length: 142cm in total (Wire from switch 112cm plus sensor connector 30cm)
Speed: Single speed, 10 second delay to start up the second fan
Applications: Suitable for single and dual fan applications
Screen Display: LED digital temp display, actual temp + set temp
Temp Display: Centigrade or Fahrenheit
Temp settings: 40°c to 110°c (104°F to 230°F)
Temp setting: Push Button
Circuit type: Pre-programmed micro controller
Dimensions: 95x65x56 mm
*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8002 which can manage both the EWP and your Thermatic Fans.