Smoke Machine Automotive, All Accessories & 100ml Smoke Fluid for Cars

Wasting time on slow, unstable smoke output with weak warranty support? Our FAST & STABLE SMOKE OUTPUT & FULL 3YEAR COVERAGE WARRANTY: Produces thick, stable visible smoke in 10 seconds, locates leak points accurately within 5 minutes. Equipped with EVAP mode, overheatprotection, adjustable pressure and builtin air compressor. Simple 12V battery clip power supply for plugandplay operation; tiny leak spots are clearly visible. Every unit passes factory smokefluid test; 3year fullcoverage warranty covers manufacturing & operational defects. Great value saves expensive vehicle repair bills.
Isnt it simple enough even for beginners?Yes!1.Fill 10ml-15ml smoke fluid to the automotive smoke machine leak detector. 2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector. 3. Connect the detector with the DC 12V battery, and it starts to work. 4.The pipe will be filled with smoke. Check the leak points. Please note:when the smoke from the equipment is not obvious,new oil should be added; When working for more than 3 hours, the smoke oil should be replaced. The filling of new oil should be carried out when the equipment iscooling,10-15ml each time.
Arent these key rules critical for safe operation?Never add smoke fluid during operation. Always check the oil level before use. Low oil triggers dry burning, overheating and thermal shutdown; refill only after cooling. Too much oil may stop startup or weaken smoke output.Max fill: 20ml (optimal 1520ml, do not overfill). The machine stabilizes 30 seconds after startup.If overheated: stop and cool before refilling. If overfilled: power off and drain excess oil below 20ml.Low battery leads to malfunctions; confirm the vehicle battery is fully charged. Use the tester only in well-ventilated open outdoor spaces.
Dont you love how fast this vacuum leak detector heats up?This vacuum leak detector heats up fast. Add 1015 ml of smoke fluid, connect 12V power, and it produces thick smoke in 10 seconds for immediate leak testing.It is only for 12V DC vehicles; higher voltage will damage internal circuits. A 12V converter is required for 24V vehicles.Use only in wellventilated outdoor/open areas. A slight odor during normal operation is harmless.For best performance and long life, use only recommended mineral oil or baby oil. Keep the unit clean and dry after each use.We offer a 1year warranty for quality issues. Contact us if you need assistance.