SX1262 LoRaWAN Node Module Expansion Board, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, with Magnetic CB Antenna-868/915M, with GNSS Function

Product description Features At A Glance This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
Common features: Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278 Suitable for Sub-GHz band, combined with the gateway, can be quickly connected to a cloud server such as TTN to build a LoRaWAN network
GNSS version features: Onboard L76K module with GPS/BD support, provides accurate clock and location info for node module Onboard button cell holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts Onboard 4 LED indicators for module operating status Comes with online development resources and manual (example in C) SX1262 433/470M LoRaWAN HAT Suitable for LF band, comes with a magnetic CB antenna and an IPEX adapter cable SX1262 433/470M LoRaWAN HAT SX1262 868/915M LoRaWAN HAT SX1262 433/470M LoRaWAN/GNSS HAT SX1262 868/915M LoRaWAN/GNSS HAT SX1262 LoRa module L76K GNSS module Power chip 5V to 3.3V LDO GPS STANDY mode
ON/OFF OFF: turn off STANDY and GPS works normally
ON: turn on STANDY, GPS stops outputting NMEA SET button Press to wake up the GNSS module in sleep mode GNSS module IPEX 1 connector L76K antenna connector LoRa module IPEX 1 connector LoRa antenna connector
Status Indicator PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator Raspberry Pi 40PIN GPIO header for connecting with Raspberry Pi series boards LoRa module and GNSS module pin header